Publikationen des Institutes für Produktentwicklung und Gerätebau

Journale

  • Bode, B.; Herrmann, K.; Reusch, J.; Plappert, S.; Ehlers, T.; Gembarski, P. C.; Hasse, C.; Lachmayer, R. (2023): Thermo-Elastic Topology Optimization For High Temperatures Gradients Using Load SeparationProcedia CIRP (Vol. 119, pp. 576–581). Elsevier BV
    DOI: https://doi.org/10.1016/j.procir.2023.03.113
  • Chatzizyrli, E.; Afentaki, A.; Hinkelmann, M.; Lachmayer, R.; Neumann, J.; Kracht, D. (2023): Optimizing LERP systems: opto-thermal steady-state simulation analysis and experimental validationOptics Express (13) 31, 22075-22091
    DOI: 10.1364/OE.489384
  • Gembarski, P. C.; Melching, J.; Plappert, S. (2023): A Knowledge-Based Engineering System for the Planning of Networked Rainwater Harvesting and Distribution SystemsIn: MDPI Sustainability 15(11)
    DOI: 10.3390/su15118636
  • Herrmann, K.; Plappert, S.; Gembarski, P. C.; Lachmayer, R. (2023): Process Chain-Oriented Design Evaluation of Multi-Material Components by Knowledge-Based EngineeringAlgorithms 16(5), 247
    DOI: https://doi.org/10.3390/a16050247
  • Meyer, I.; Oel, M.; Ehlers, T.; Lachmayer, R. (2023): Additive manufacturing of multi-material parts – Design guidelines for manufacturing of 316L/CuCrZr in laser powder bed fusionHeliyon, 9(8), e18301
    DOI: https://doi.org/10.1016/j.heliyon.2023.e18301
  • Müller, P., Budau, J. P., & Gembarski, P. C. (2023): Development of an algorithm-based approach for Computational Design Synthesis of individualized implantsProcedia CIRP (Vol. 119, pp. 1091–1096). Elsevier BV
    DOI: https://doi.org/10.1016/j.procir.2023.03.152
  • Niedermeyer, J.; Ehlers, T.; Lachmayer, R. (2023): Potential of additively manufactured particle damped compressor blades: A literature reviewProcedia CIRP (Vol. 119, pp. 570–575), Elsevier BV
    DOI: https://doi.org/10.1016/j.procir.2023.02.151
  • Oel, M.; Rossmann, J.; Bode, B.; Meyer, I.; Ehlers, T.; Hackl, C. M.; Lachmayer, R. (2023): Multi-material laser powder bed fusion additive manufacturing of concentrated wound stator teethAdditive Manufacturing Letters, 7, 100165
    DOI: https://doi.org/10.1016/j.addlet.2023.100165
  • Steinnagel, C.; Bastimar, C.; Gembarski, P. C.; Plappert, S.; Müller, P.; Lachmayer, R. (2023): Application of the Computational Design Synthesis framework for individualized car seatsProcedia CIRP (Vol. 119, pp. 1109–1114), Elsevier BV
    DOI: https://doi.org/10.1016/j.procir.2023.02.184
  • Wurst, J.; Ganter, N.; Ehlers, T.; Schneider, J. A.; Lachmayer, R. (2023): Assessment of the ecological impact of metal additive repair and refurbishment using powder bed fusion by laser beam based on a multiple case studyJournal of Cleaner Production 423(3)
    DOI: 10.1016/j.jclepro.2023.138630
  • Ziebehl, A.; Grabe, T.; Biermann, T.; Xia, P.; Teves, S.; Lachmayer, R. (2023): Parametric multiphysics study of focus-variable silicone lensesApplied Optics, 62, 30
    DOI: 10.1364/AO.499811
  • Dai, Z.; Wolf, A.; Ley, P. P.; Glück, T.; Sundermeier, M. C.; Lachmayer, R. (2022): Requirements for automotive lidar systemsSensors, 22(19), 7532
    DOI: https://doi.org/10.3390/s22197532
  • Ehlers, T.; Lachmayer, R. (2022): Design of Particle Dampers for Laser Powder Bed FusionIn: Applied Sciences, 12(4), 2237
    DOI: 10.3390/app12042237
  • Lachmayer, R.; Behrens, B.-A.; Ehlers, T.; Müller, P.; Althaus, P.; Oel, M.; Farahmand, E.; Gembarski, P. C.; Wester, H.; Huebner, S. (2022): Process-Integrated Lubrication in Sheet Metal FormingJournal of Manufacturing and Materials Processing, 6(5), 121
    DOI: 10.3390/jmmp6050121
  • Ley, P.-P.; Knöchelmann, M.; Wolf, A.; Lachmayer R. (2022): Tailoring the V-Model for Optics: A Methodology for Optomechatronic SystemsIn: Applied Sciences, 12(15), 7798
    DOI: 10.3390/app12157798
  • Müller, P., Gembarski, P. C., & Lachmayer, R. (2022): Density-Based Topology Optimization for a Defined External State of Stress in Individualized EndoprosthesisProceedings of the Design Society (Vol. 2, pp. 533–542). Cambridge University Press (CUP)
    DOI: https://doi.org/10.1017/pds.2022.55
  • Plappert, S.; Becker, C.; Gembarski, P.C.; Lachmayer, R. (2022): Feasibility Evaluation of Milling Designs Using Multi-Agent SystemsProceedings of the Design Society, Vol. 2, 763-772
    DOI: https://doi.org/10.1017/pds.2022.78
  • Plappert, S.; Gembarski, P. C.; Lachmayer, R. (2022): Development of a knowledge-based and collaborative engineering design agentProcedia Computer Science, (Vol. 207, pp. 946-955). Elsevier BV
    DOI: https://doi.org/10.1016/j.procs.2022.09.150
  • Schwede, L.-N.; Greve, E.; Krause, D.; Otto, K.; Moon, S. K.; Albers, A.; Kirchern, E.; Lachmayer, R.; Bursac, N.; Inkermann, D.; Rapp, S.; Hausmann, M.; Schneider, J. (2022): How to Use the Levers of Modularity Properly – Linking Modularization to Economic Targetsin: ASME, Journal of Mechanical Design
    ISSN: 1050-0472
  • Ehlers, T.; Tatzko, S.; Wallaschek, J.; Lachmayer, R. (2021): Design of particle dampers for additive manufacturing, In: Additive Manufacturing, Vol. 38 , pp. 101752
    DOI: 10.1016/j.addma.2020.101752
  • Gembarski, P. C.; Plappert, S.; Lachmayer, R. (2021): Making design decisions under uncertainties: probabilistic reasoning and robust product designJournal of Intelligent Information Systems, Vol. 52, 563–581
    DOI: https://doi.org/10.1007/s10844-021-00665-6
  • Glück, T.; Biermann, T.; Wolf, A.; Budig, S.; Ziebehl, A.; Knöchelmann, M.; Lachmayer, R. (2021): Distraction Potential of Vehicle-Based On-Road ProjectionApplied Science, 11(24), 12030
    DOI: 10.3390/app112412030
  • Khan, M.S.; Farooq, H.; Wittmund, C.; Klimke, S.; Lachmayer, R.; Renz, F.; Roth, B. (2021): Polymer Optical Waveguide Sensor Based on Fe-Amino-Triazole Complex Molecular SwitchesMDPI
    DOI: 10.3390/polym13020195
  • Kranert, F.; Budde, J.; Hinkelmann, M.; Neumann, J.; Kracht, D.; Lachmayer, R. (2021): 3D Fabrication and Characterization of Polymer-Imprinted Optics for Function-Integrated, Lightweight Optomechanical Systems; In: Journal of Laser Applications, Vol.33, Issue 4
    DOI: 10.2351/7.0000492
  • Schneider, D.; Shrotri, A.; Flatt, H.; Stübbe, O.; Wolf, A.; Lachmayer, R.; Bunge, Ch.-A. (2021): Impact of industrial environments on visible light communication, In: Optics Express, S. 16087-16104
    DOI: 10.1364/OE.421757
  • Altun, O.; Zhang, D.; Siqueira, R.; Wolniak, P.; Mozgova, I.; Lachmayer, R. (2020): Identification of dynamic loads on structural component with artificial neural networksProcedia Manufacturing, Volume 52, Pages 181-186, ISSN 2351-9789
    DOI: 10.1016/j.promfg.2020.11.032
  • Gembarski, P.C. (2020): Agent Collaboration in a Multi-Agent-System for Analysis and Optimization of Mechanical Engineering PartsProcedia Computer Science 176:592-601
    DOI: DOI: 10.1016/j.procs.2020.08.061
  • Hackl, J.; Krause, D.; Otto, K.; Windheim, M.; Moon, S. K.; Bursac, N.; Lachmayer, R. (2020): Impact of Modularity Decisions on a Firm's Economic ObjectivesASME - Journal of Mechanical Design, 142 (4)
    DOI: 10.1115/1.4044914
  • Khan, M. S.; Saeed, W. M.; Roth, B.; Lachmayer, R. (2020): Diffractive optics based automotive lighting systemAdvanced Optical Technologies
    DOI: 10.1515/aot-2020-0055
  • Khan, M.; Lachmayer, R.; Roth, B. (2020): Maskless Lithography for Versatile and Low Cost Fabrication of Polymer based Micro- and Nano-Optical StructuresOSA Continuum, 3 (10)
    DOI: 10.1364/OSAC.400056
  • Li, Y.; Knöchelmann, M.; Lachmayer, R. (2020): Beam Pre-Shaping Methods Using Lenslet Arrays for Area-Based High-Resolution Vehicle Headlamp SystemsApplied Sciences 2020, 10(13), 4569
    DOI: /10.3390/app10134569
  • Behrens, B.-A.; Breidenstein, B.; Duran, D.; Herbst, S.; Lachmayer, R.; Löhnert, S.; Matthias, T.; Mozgova, I.; Nürnberger, F.; Prasanthan, V.; Siqueira, R.; Töller, F.; Wriggers, P. (2019): Simulation-Aided Process Chain Design for the Manufacturing of Hybrid ShaftsHTM - Journal of Heat Treatment and Materials 74(2): 115–135
    DOI: 10.3139/105.110378
  • Hagen, S.; Brinker, J.; Gembarski, P.C.; Lachmayer, R.; Thomas, O. (2019): Integration von Smarten Produkten und Dienstleistungen im IoT-Zeitalter: Ein Graph-basierter EntwicklungsansatzHMD Praxis der Wirtschaftsinformatik
    DOI: 10.1365/s40702-019-00569-8
  • Kammler, F.; Gembarski, P.C.; Brinker, J.; Thomas, O.; Lachmayer, R. (2019): Kunden- und kontextabhängige Konfiguration Smarter Produkte: Digitales Potenzial jenseits physischer Grenzen?HMD Praxis der Wirtschaftsinformatik
    DOI: 10.1365/s40702-019-00523-8
  • Knöchelmann, M., Held, M., Kloppenburg, G., Lachmayer, R. (2019): High-resolution headlamps – technology analysis and system designAdvanced Optical Technologies, 8(1), pp. 33-46
    DOI: 10.1515/aot-2018-0060
  • Lachmayer, R.; Rettschlag, K. (2019): Workshop Konstruktion für die Additive Fertigung 2019 in HannoverNewsletter Wissenschaftliche Gesellschaft für Produktionstechnik (WiGeP), Ausgabe 2, November 2019, S. 20-21, ISSN: 1613-5504
  • Siqueira, R.; Bibani, M.; Duran, D.; Mozgova, I.; Lachmayer, R.; Behrens, B.-A. (2019): An Adapted Case-based Resoaning for Design and Manufacturing of Tailored Forming Multi-material ComponentsInternational Journal for Interactive Design and Manufacturing
    DOI: 10.1007/s12008-019-00566-7
  • Gembarski, P.C.; Lachmayer, R. (2018): Solution Space Development: Conceptual Reflections and Development of the Parameter Space Matrix as Planning Tool for Geometry-based Solution SpacesInternational Journal of Industrial Engineering and Management (IJIEM)
    DOI: 10.24867/IJIEM-2018-4-177
  • Gembarski, P.C.; Lachmayer, R. (2018): Product-Service-Systems - What and why Developers can learn from Mass CustomizationEnterprise Modelling and Information Systems Architectures, Vol. 13, No. 16, pp. 1-16
    DOI: 10.18417/emisa.13.16
  • Khan, M. S.; Rahlves, M.; Lachmayer, R.; Roth, B. (2018): Polymer-based diffractive optical elements for rear end automotive applications: design and fabrication processApplied Optics, Vol. 57, Issue 30, S. 9106-9113
    DOI: 10.1364/AO.57.009106
  • Lachmayer R., Yanchevskyi, I., Mozgova, I., Gottwald, P. (2018): Identification of several non-stationary loads applied to an elastically deformed structureApplied and Computational Mechanics, Vol. 12, Iss. 1., S. 17-32
    DOI: 10.24132/acm.2018.365
  • Lippert, R. B.; Siqueira, R.; Lachmayer, R.; Baudach, T.; Knöß, M. (2018): Additive Fertigung als Bestandteil des industriellen KonstruktionsprozessesKonstruktion, Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe; Springer VDI-Verlag; Ausgabe 5/2018; S. 46 - 49; ISSN: 0720-5953
  • Mozgova, I.; Yanchevskyi, I.; Gerasymenko, M.; Lachmayer, R. (2018): Mobile automated diagnostics of stress state and residual life prediction for a component under intensive random dynamic loadsProcedia Manufacturing, Vol. 24, S. 210–215
    DOI: 10.1016/j.promfg.2018.06.037
  • Siqueira, R.; Mozgova, I.; Lachmayer, R. (2018): An Interfacial Zone Evolutionary Optimization Method with Manufacturing Constraints for Hybrid ComponentsJournal of Computational Design and Engineering
    DOI: 10.1016/j.jcde.2018.10.003
  • Gembarski, P. C.; Lachmayer, R. (2017): Designing Customer Co-Creation: Business Models and Co-Design ActivitiesInternational Journal of Industrial Engineering and Management (IJIEM), 8.3, pp.121-130
  • Gembarski, P. C.; Lachmayer, R. (2017): How Rule-Based Systems impact Product ComplexityANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, 15.1, pp.17-24, ISSN: 1584-2665
  • Gembarski, P.C.; Li, H.; Lachmayer, R. (2017): Template-based modelling of structural componentsInternational Journal of Mechanical Engineering and Robotics Research, Vol. 6, No. 5, pp. 336-342
    DOI: 10.18178/ijmerr.6.5.336-342
  • Höhl, M.; DeTemple, D.; Lyutenski, S.; Leuteritz, G.; Varkentin, A.; Schmitt, H.; Lenarz, T.; Roth, B.; Meinhardt-Wollweber, M.; Morgner, U. (2017): Optical properties of the human round window membrane SPIE Biomedical Optics
    DOI: 10.1117/1.JBO.22.10.105007
  • Wippo, V.; Rettschlag, K.; Surjoseputro, W.; Jäschke, P.; Suttmann, O.; Ziegmann, G.; Overmeyer, L. (2017): Laser transmission welding of semiinterpenetrating polymer networks-compositesJournal of Laser Applications 2 (29), 22407
    DOI: 10.2351/1.4983244
  • Demminger, C.; Mozgova, I.; Quirico, M.; Uhlich, F.; Denkena, B.; Lachmayer, R.; Nyhuis, P. (2016): The Concept of Technical Inheritance in Operation: Analysis of the Information Flow in the Life Cycle of Smart ProductsProcedia Technology, Volume 26, 2016, Pages 79-88
    DOI: 10.1016/j.protcy.2016.08.012
    ISBN: ISSN 2212-0173
  • Johannknecht, F.; Gatzen, M. M.; Lachmayer, R. (2016): Life Cycle Cost Model for Considering Fleet Utilization in Early Conceptual Design PhasesProcedia CIRP, Vol. 48, S. 68-72, ISSN: 2212-8271
  • Kloppenburg, G.; Wolf, A.; Lachmayer, R. (2016): High-resolution vehicle headlamps: technologies and scanning prototypeAdvanced Optical Technologies 5(2): 147–155.
    DOI: 10.1515/aot-2016-0001
    ISBN: 2192-8576
  • Lachmayer, R.; Lippert, R. B. (2016): Der Megatrend 3D-Druck - Additive Manufacturing auf dem Weg in die AnwendungNewsletter Wissenschaftliche Gesellschaft für Produktentwicklung (WiGeP), Ausgabe 1, April 2016
    ISBN: 1613-5504
  • Lachmayer, R.; Mozgova, I.; Scheidel, W. (2016): An Approach to Describe Gentelligent Components in their Life CycleProcedia Technology, Volume 26, 2016, Pages 199-206
    DOI: 10.1016/j.protcy.2016.08.027
    ISBN: ISSN 2212-0173
  • Lachmayer, R.; Wolf, A.; Kloppenburg, G. (2015): Additive manufacturing of optical componentsSPIE Newsroom
    DOI: 10.1117/2.1201511.006233
  • Denkena, B.; Mörke, T.; Krüger, M.; Schmidt, J.; Boujnah, H.; Meyer, J.; Gottwald, P.; Spitschan, B.; Winkens, M. (2014): Development and first applications of gentelligent components over their lifecycleCIRP Journal of Manufacturing Science and Technology, Volume 7/2, Elsevier, 2014, pp. 139-150
  • Lachmayer, R.; Mozgova, I.; Reimche, W.; Colditz, F.; Mroz, G.; Gottwald, P. (2014): Technical Inheritance: A Concept to Adapt the Evolution of Nature to Product Engineering Procedia Technology 15 (2014) pp. 178–187
    DOI: 10.1016/j.protcy.2014.09.070
  • Lachmayer, R.; Mozgova, I.; Sauthoff, B.; Gottwald, P. (2014): Evolutionary Approach for an Optimized Analysis of Product Life Cycle Data Procedia Technology 15 ( 2014 ) pp. 359–368
    DOI: 10.1016/j.protcy.2014.09.090
  • Lachmayer, R.; Wolf, A.; Kloppenburg, G. (2014): System efficiency of laser-based white lightAdvanced Optical Technologies 3 (5-6): 523–530, ISSN (Online) 2192-8584, ISSN (Print) 2192-8576
    DOI: 10.1515/aot-2014-0048
    ISBN: 2192-8576

Paper

  • Dai, Z.; Sundermeier, M. C.; Glück, T.; Findling, P.; Lachmayer, R. (2023): Increasing the detection range of non-scanning solid-state LiDAR systems using beam shapingProceedings of Light-Emitting Devices, Materials, and Applications XXVII, 12411, SPIE OPTO, San Francisco, California, United States
    DOI: https://doi.org/10.1117/12.2648721
  • Ehlers, T.; Meyer, I.; Oel, M.; Bode, B.; Gembarski, P. C.; Lachmayer, R. (2023): Effect-Engineering by Additive ManufacturingR. Lachmayer, B. Bode, & S. Kaierle (Eds.), Innovative Product Development by Additive Manufacturing 2021 (pp. 1–19). Springer International Publishing
    DOI: https://doi.org/10.1007/978-3-031-05918-6_1
  • Glück, T.; Sundermeier, M. C.; Dai, Z.; Lachmayer, R. (2023): Physiologische Untersuchung von fahrzeugbasierten FahrbahnprojektionenLicht2023, Salzburg, Österreich, 26.-29. März 2023, S.255-264
    DOI: https://doi.org/10.15488/14730
  • Herrmann, K.; Pusch, F.; Plappert, S.; Bode, B.; Mozgova, I., Gembarski, P. C., Lachmayer, R. (2023): Prozesskettenorientierte Herstellbarkeitsanalyse von Produkten durch die Nutzung eines Constraint-Satisfaction-ProblemsStuttgarter Symposium für Produktentwicklung SSP 2023
    DOI: https://doi.org/10.15488/14221
  • Kahlfeld, R.; Meyer, I.; Kabelac, S.; Lachmayer, R. (2023): Design of a Thermo-Hydraulically Optimised Heat Exchanger for Production by Laser Powder Bed FusionR. Lachmayer, B. Bode, & S. Kaierle (Eds.), Innovative Product Development by Additive Manufacturing 2021 (pp. 129–148). Springer International Publishing
    DOI: https://doi.org/10.1007/978-3-031-05918-6_9
  • Meyer zu Westerhausen, S.; Schneider, J.; Lachmayer, R. (2023): Reliability Analysis for Sensor Networks and Their Data Acquisition: A Systematic Literature ReviewProceedings of the International Conference on Engineering Design (ICED23), Bordeaux, France, 24-28 July 2023
    DOI: https://doi.org/10.1017/pds.2023.307
  • Meyer zu Westerhausen, S.; Schneider, J.; Lachmayer, R. (2023): Automatic Reliability Assessment of Data Paths in Component-integrated Sensor NetworksProceedings of the 33rd European Safety and Reliability Conference (ESREL 2023), Southampton, United Kingdom, 03-08 September 2023
    DOI: 10.3850/978-981-18-8071-1_P224-cd
  • Müller, L.; Wawer, M. L.; Heimes, N.; Uhe, J.; Koepler, O.; Auer, S.; Lachmayer, R.; Mozgova, I. (2023): Data quality assurance in the research process using the example of tensile testsDS 125: Proceedings of the 34th Symposium Design for X (DFX2023)
    DOI: https://doi.org/10.35199/dfx2023.15
  • Müller, P., Steinnagel, C., & Gembarski, P. C. (2023): Digital Process Chains for the Anthropometric Individualization of ProductsProduction Processes and Product Evolution in the Age of Disruption (pp. 74–82). Springer International Publishing
    DOI: https://doi.org/10.1007/978-3-031-34821-1_9
  • Plappert, S.; Becker, C.; Pusch, F.; Heuer, S.; Gembarski, P. C. (2023): Recommendation of Mass Customized Products with a Multi-agent System: A Case StudyGalizia, F.G., Bortolini, M. (eds) Production Processes and Product Evolution in the Age of Disruption. CARV 2023. Lecture Notes in Mechanical Engineering. Springer, Cham
    DOI: https://doi.org/10.1007/978-3-031-34821-1_11
  • Plappert, S.; Ganter, N. V.; von Hören, T.; Gembarski, P. C.; Lachmayer, R. (2023): Decision-Support for Additive Repair Processes with a Multi-Agent SystemApplied Systemic Studies: Springer International Publishing
    DOI: https://doi.org/10.1007/978-3-031-27470-1_1
  • Sundermeier, M. C.; Glück, T.; Dai, Z.; Hamlaoui, R; Lachmayer, R. (2023): Simulationsumgebung zur Ermittlung der lichttechnischen Einflüsse auf kamerabasierte ObjekterkennungLicht2023, Salzburg, Österreich, 26.-29. März 2023, S.246-254
    DOI: https://doi.org/10.15488/14731
  • Wawer, M. L.; Herrmann, K.; Plappert, S.; Wurst, J.; Gembarski, P.; Lachmayer, R. (2023): Structuring and Provision of Manufacturing knowledge through the Manufacturing Resource OntologyDS 125: Proceedings of the 34th Symposium Design for X (DFX2023)
    DOI: https://doi.org/10.35199/dfx2023.08
  • Wawer, M. L.; Wurst, J.; Lachmayer, R. (2023): Quality assessment of research data management in research projectsVol. 1 (2023): 1st Conference on Research Data Infrastructure (CoRDI) - Connecting Communities
    DOI: https://doi.org/10.52825/cordi.v1i.420
  • Wurst, J.; Rosemann, D.; Mozgova, I.; Lachmayer, R. (2023): Concept and Implementation of a Student Design Project for the Development of Sustainable ProductsKohl, H., Seliger, G., Dietrich, F. (eds) Manufacturing Driving Circular Economy. GCSM 2022. Lecture Notes in Mechanical Engineering. Springer, Cham
    DOI: 10.1007/978-3-031-28839-5_88
  • Wurst, J.; Steinhoff, T.; Mozgova, I.; Hassel, T.; Lachmayer, R. (2023): Aspects of a Sustainability Focused Comparison of the Wire Arc Additive Manufacturing (WAAM) and the Laser Powder Bed Fusion (LPBF) ProcessScholz, S.G., Howlett, R.J., Setchi, R. (eds) Sustainable Design and Manufacturing. SDM 2022. Smart Innovation, Systems and Technologies, vol 338. Springer, Singapore
    DOI: 10.1007/978-981-19-9205-6_9
  • Ehlers, T.; Lachmayer, R. (2022): Design Rules for Laser Beam Melted Particle DampersProceedings of the Design Society, 2, S. 2443-2452
    DOI: 10.1017/pds.2022.247
  • Ehlers, T.; Lachmayer, R.; Vajna, S.; Halle, T. (2022): ProduzierbarkeitVajna, S. (Hrsg.)(2022): Integrated Design Engineering, Springer Nature, Berlin, S. 327 - 365
    DOI: 10.1007/978-3-662-60439-7_9
  • Ganter, N. V.; Ehlers, T.; Oel, M.; Behrens, B.-A.; Müller, P.; Hübner, S.; Althaus, P.; Bode, B.; Lachmayer, R. (2022): Do Additive Manufacturing Processes Enable More Sustainable Products? Circulation of Metallic Components Through Repair and Refurbishment by the Example of a Deep-Drawing ToolInnovative Product Development by Additive Manufacturing, 2022, Springer International Publishing
    DOI: https://dx.doi.org/10.1007/978-3-031-27261-5_1
  • Grabe, T.; Röttger, J.; Rettschlag, K.; Lachmayer, R. (2022): Additive Manufacturing of Optics and Optomechatronics: Multiphysics Simulation Environments for Process, Materials and Design AnalysisIn: Lachmayer, R.; Kracht, D.; Wesling, V.; Ahlers, H. (Hrsg.): Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK); S. 51-76; Springer, Cham.
    DOI: 10.1007/978-3-030-96501-3_3
    ISBN: 978-3-030-96501-3_3
  • Herrmann, K.; Bode, B.; Wurst, J.; Gembarski, P. C.; Mozgova, I.; Lachmayer, R. (2022): Quantification of the material-related environmental impact of topology-optimized multi-material componentsDS 119: Proceedings of the 33rd Symposium Design for X (DFX2022): The Design Society
    DOI: https://doi.org/10.35199/dfx2022.01
  • Hoppe, L. V.; Kuschmitz, S.; Gembarski, P. C.; Vietor, T.; Lachmayer, R. (2022): DIGITAL LEARNING ENVIRONMENTS TO SUPPORT DESIGN EDUCATIONDS 117: Proceedings of the 24th International Conference on Engineering and Product Design Education (E&PDE 2022), London South Bank University in London, UK. 8th-9th September 2022
    DOI: DOI: 10.35199/EPDE.2022.79
  • Kranert, F.; Budde, J.; Hinkelmann, M.; Lachmayer, R.; Neumann, J.; Kracht, D. (2022): Additively Manufactured Polymer Optomechanics and Their Application in Laser SystemsIn: Lachmayer, R.; Kracht, D.; Wesling, V.; Ahlers, H. (Hrsg.): Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK); S. 25-50; Springer, Cham.
    DOI: 10.1007/978-3-030-96501-3_2
    ISBN: 978-3-030-96501-3_2
  • Kuschmitz, S.; Hoppe, L. V.; Gembarski, P. C.; Lachmayer, R.; Vietor, T. (2022): DIGITAL KNOWLEDGE TRANSFER FOR ADDITIVE MANUFACTURING USING BLENDED LEARNINGDS 117: Proceedings of the 24th International Conference on Engineering and Product Design Education (E&PDE 2022), London South Bank University in London, UK. 8th-9th September 2022
    DOI: DOI: 10.35199/EPDE.2022.84
  • Lachmayer, R., Mozgova, I. (2022): Technical Inheritance as an Approach to Data-Driven Product Developmentin: Krause, D.; Heyden, E.; Eds. (Hrsg.): Design Methodology for Future Products; S. 47-64, Springer Nature Switzerland AG
    DOI: 10.1007/978-3-030-78368-6_3
    ISBN: 978-3-030-78367-9
  • Müller, P., Gembarski, P. C., & Lachmayer, R. (2022): Reasoning Mechanism for the Implementation of Computational Design Synthesis2022 IEEE 26th International Conference on Intelligent Engineering Systems (INES). IEEE.
    DOI: https://doi.org/10.1109/ines56734.2022.9922623
    ISSN: 1543-9259
  • Oel, M.; Gembarski, P. C.; Lachmayer, R. (2022): Using Axiomatic Design for the Development of Product Configuration SystemsProceedings of the 10th International Conference on Mass Customization and Personalization - Community of Europe. Novi Sad : University of Novi Sad - Faculty of Technical Sciences
    DOI: https://doi.org/10.15488/12995
  • Plappert, S., Gembarski, P. C., Lachmayer, R. (2022): Knowledge-Based Design Evaluation of Rotational CAD-Models with a Multi-Agent SystemAdvances in Systems Engineering: Springer
    DOI: https://doi.org/10.1007/978-3-030-92604-5_5
  • Plappert, S.; Becker, C.; Gembarski, P. C.; Lachmayer, R. (2022): Application of Decentralized and Self-Regulating Knowledge Bases for Assembly Design AutomationProceedings of the 10th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2022), Novi Sad, Serbien
    DOI: https://doi.org/10.15488/12909
  • Plappert, S.; Teves, S.; Öztürk, M.; Gembarski, P. C. (2022): Constraint Solver for a Fixture Design – Results of a Student Case StudyProceedings of the 26th ACM International Systems and Software Product Line Conference - Volume B
    DOI: https://doi.org/10.1145/3503229.3547068
  • Rettschlag, K.; Kranert, F.; Hinkelmann, M.; Jäschke, P.; Kaierle, S.; Lachmayer, R. (2022): Additive Manufacturing of Glass Materials for the Production of Optical, Thermal and Structural ComponentsIn: Lachmayer, R.; Kracht, D.; Wesling, V.; Ahlers, H. (Hrsg.): Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK); S. 1-23; Springer, Cham.
    DOI: 10.1007/978-3-030-96501-3_1
    ISBN: 978-3-030-96501-3_1
  • Saralajew, S.; Marenzzi, R.; Wolf, A.; Ewecker, L.; Roos, S.; Lachmayer, R. (2022): Provident Vehicle Detection at Night: A subject studyin: Proceedings of the 14th International Symposium on Automotive Lighting (ISAL), pp. 185-195
    ISBN: 978-3-8316-4953-2
  • Steinnagel, C., Bastimar, C., Gembarski, P. C., Plappert, S., Müller, P., Lachmayer, R. (2022): Characterization of Additive Manufactured Structures for the Development of Foam-Replacement CushionsInnovative Product Development by Additive Manufacturing: Springer International Publishing
    DOI: https://doi.org/10.1007/978-3-031-27261-5_6
  • Sundermeier, M. C.; Dierend, H.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2022): Active NIR illumination for improved camera view in automated driving applicationin: Proc. SPIE 12022, Light-Emitting Devices, Materials, and Applications XXVI, 120220A
    DOI: 10.1117/12.2608162
  • Tatzko, S.; Ehlers, T.; Kleyman, G.; Lachmayer, R. (2022): Nonlinear granular damping of structures with cavities from additive manufacturingENOC 2022 - Book of abstracts. Lyon : University of Lyon, S. 244-245
    DOI: 10.15488/12805
  • Wurst, J.; Mozgova, I.; Lachmayer, R. (2022): Normalization Matrix for Sustainability Assessments Considering the Laser Powder Bed Fusion ProcessLachmayer, R., Bode, B., Kaierle, S. (eds) Innovative Product Development by Additive Manufacturing 2021. Springer, Cham
    DOI: 10.1007/978-3-031-05918-6_14
  • Wurst, J.; Mozgova, I.; Lachmayer, R. (2022): Sustainability Assessment of Products manufactured by the Laser Powder Bed Fusion (LPBF) ProcessProcedia CIRP 105:243-248
    DOI: 10.1016/j.procir.2022.02.040
  • Wurst, J.; Schneider, J. A.; Ehlers, T.; Mozgova, I.; Lachmayer, R. (2022): Corporate Strategy Based Quantitative Assessment of Sustainability Indicators at the Example of a Laser Powder Bed Fusion ProcessScholz, S.G., Howlett, R.J., Setchi, R. (eds) Sustainable Design and Manufacturing. KES-SDM 2021. Smart Innovation, Systems and Technologies, vol 262. Springer, Singapore
    DOI: 10.1007/978-981-16-6128-0_4
  • Bender, B.; Gericke, K.; Heusel, J.; Bronnhuber, T.; Helms, O.; Krzywinski, J.; Wölfel, C.; Klocke, F.; Dilger, K.; Müller, R.; Ehlers, T.; Lachmayer, R. (2021): Gestaltungsrichtlinien, In: Bender, B.; Gericke, K. (Hrsg.)(2021): Pahl/Beitz Konstruktionslehre, Springer Vieweg, Berlin Heidelberg, S. 567– 828
    DOI: 10.1007/978-3-662-57303-7_16
    ISBN: 978-3-662-57302-0
  • Biermann, T.; Ziebehl, A.; Grabe, T.; Röttger, J.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2021): Magnetically actuated solid body PDMS lensProc. SPIE 11667
    DOI: 10.1117/12.2578551
  • Brinker J.; Bertke A.; Ganter N.; Thomas O.; Lachmayer R. (2021): Können wir das nicht reparieren? – Entwicklung eines Klassifikationsrahmens für den Einsatz von Additive Repair im Maschinen- und Anlagenbau; In: Lachmayer R.; Rettschlag K.; Kaierle S. (eds) Konstruktion für die Additive Fertigung 2020; Springer Vieweg, Berlin, Heidelberg
    DOI: 10.1007/978-3-662-63030-3_13
  • Capps, N.; Goldstein, J. T.; Hohnholz, A.; Rettschlag, K.; Sleiman, K.; Kaierle, S.; Kinzel, E. C. (2021): Digital forming of glass by controlling loading and laser heatingProc. SPIE 11677
    DOI: 10.1117/12.2579212
  • Dai, Z.; Li, Y.; Sundermeier, M.C.; Grabe, T.; Lachmayer, R. (2021): Lidars for vehicles: from the requirements to the technical evaluationin: 9th International Forum on Automotive Lighting (IFAL)
    DOI: 10.15488/11352
  • Ehlers, T.; Lachmayer, R. (2021): Design of a Motorcycle Triple Clamp Optimised for Stiffness and DampingIn: Pfingstl, S.; Horoschenkoff, A.; Höfer, P.; Zimmermann, M. (Hrsg.)(2021): Proceedings of the Munich Symposium on Lightweight Design 2020, Springer Vieweg Verlag, Berlin, Heidelberg, S. 1-17
    DOI: 10.1007/978-3-662-63143-0_1
    ISBN: 978-3-662-63142-3
  • Ganter N.; Gembarski P.C.; Lachmayer R. (2021): Einsatz additiver Fertigungsverfahren für die Bauteilreparatur: Ein literaturbasierter Überblick; In: Lachmayer R.; Rettschlag K.; Kaierle S. (eds) Konstruktion für die Additive Fertigung 2020; Springer Vieweg, Berlin, Heidelberg
    DOI: 10.1007/978-3-662-63030-3_15
  • Ganter, N. V.; Plappert, S.; Gembarski, P. C.; Lachmayer, R. (2021): Assessment of Repairability and Process Chain Configuration for Additive RepairTowards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Springer
    DOI: https://doi.org/10.1007/978-3-030-90700-6_29
  • Ganter, N.; Bode, B.; Gembarski, P.C.; Lachmayer, R. (2021): METHOD FOR UPGRADING A COMPONENT WITHIN REFURBISHMENT; Proceedings of the Design Society, 1, p. 2057-2066
    DOI: 10.1017/pds.2021.467
  • Ganter, N.; Ehlers, T.; Gembarski, P.C.; Lachmayer, R. (2021): ADDITIVE REFURBISHMENT OF A VIBRATION-LOADED STRUCTURAL COMPONENT; Proceedings of the Design Society, 1, p. 345-354
    DOI: 10.1017/pds.2021.35
  • Grabe, T.; Lammers, M.; Wang, S.; Wang, X.; Rettschlag, K.; Sleiman, K.; Barroi, A.; Biermann, T.; Ziebehl, A.; Röttger, J.; Ley, P.-P.; Wolf, A.; Jäschke, P.; Hermsdorf, J.; Kaierle, S.; Ahlers, H.; Lachmayer, R. (2021): Additive manufacturing of fused silica using coaxial laser glass deposition: experiment, simulation and discussionProc. SPIE 11677
    DOI: 10.1117/12.2577205
  • Grabe, T.; Rettschlag, K; Wang, X.; Wang, S.; Ziebehl, A.; Ley, P.; Lachmayer R. (2021): Additive Fertigung von Glas: Simulation und Messung von Temperaturen in der Prozesszone(Hrsg.): Tagungsband des 4. Symposiums Metalltechnik, S. 28-42, online verfügbar unter https://www.czm.tu-clausthal.de/fileadmin/SM_2021/Tagungsband_2021.pdf
  • Herrmann, K.; Altun, O.; Wolniak, P.; Mozgova, I.; Lachmayer, R. (2021): Methodischer Aufbau von Entwicklungsumgebungen nach dem Generative Parametric Design ApproachDS 111: Proceedings of the 32nd Symposium Design for X (DFX2021): The Design Society
    DOI: https://doi.org/10.35199/dfx2021.14
  • Herrmann, K.; Brockmöller, T.; Gembarski, P. C.; Mozgova, I.; Lachmayer, R. (2021): Fertigungsstufen-basiertes Gestaltungsmodell für mechanische BauteileProceedings of the of the Stuttgarter Symposium für Produktentwicklung SSP 2021, 20. May 2021, Stuttgart, Germany
    DOI: https://doi.org/10.15488/14172
  • Hoppe, L. V.; Gembarski, P. C.; Lachmayer, R. (2021): Intelligent tutoring system as a tool of formative assessment in design educationDS 110: Proceedings of the 23rd International Conference on Engineering and Product Design Education (E&PDE 2021), VIA Design, VIA University in Herning, Denmark. 9th-10th September 2021
    DOI: DOI: 10.35199/EPDE.2021.40
  • Kranert, F.; Budde, J.; Hinkelmann, M.; Neumann, J.; Kracht, D.; Lachmayer, R. (2021): Thermische und strukturelle Analyse von Polymermaterialen in generativ gefertigten Optomechaniken für den Einsatz in der LaserentwicklungClausthaler Zentrum für Materialtechnik (Hrsg.): Tagungsband des 4. Symposiums Metalltechnik, S. 44-54, online verfügbar unter https://www.czm.tu-clausthal.de/fileadmin/SM_2021/Tagungsband_2021.pdf
  • Kranert, F.; Budde, J.; Hinkelmann, M.; Wienke, A.; Neumann, J.; Kracht, D.; Lachmayer, R. (2021): Quasi-monolithic laser system based on 3D-printed optomechanicsProc. SPIE 11667
    DOI: 10.1117/12.2577457
  • Leuteritz, G.; Held, M. P.; Lachmayer, R. (2021): Selective Laser Melting of Reflective OpticsIn: Heinrich, A. (Hrsg.): 3D Printing of Optical Components, Springer Series in Optical Sciences, S. 23-44
    DOI: 10.1007/978-3-030-58960-8
    ISBN: 978-3-030-58960-8
  • Müller, P.; Gembarski, P. C.; Lachmayer, R. (2021): Spezifikationen einer Entwicklungsumgebung zur Synthese einer patientenindividuellen Kurzschaftendoprothese der HüfteStuttgarter Symposium für Produktentwicklung SSP 2021, S. 151-162, Stuttgart
    DOI: https://doi.org/10.15488/11541
    ISSN: 2364-4885
  • Plappert, S.; Gembarski, P. C.; Lachmayer, R. (2021): Multi-Agent Systems in Mechanical Engineering: A ReviewAgents and Multi-Agent Systems: Technologies and Applications, Springer
    DOI: https://doi.org/10.1007/978-981-16-2994-5_16
  • Plappert, S.; Wolniak, P.; Gembarski, P. C.; Lachmayer, R. (2021): Implicit and Explicit Modeling of Uncertainty in Early Design Stages of Product Design: A Comparative StudyTowards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Springer
    DOI: https://doi.org/10.1007/978-3-030-90700-6_74
  • Röttger, J.; Grabe, T.; Biermann, T.; Ziebehl, A.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2021): Multiphysical simulation approach for specifying material properties of additively manufactured laser heat sinks: Potentials and challengesDGaO-Proceedings 2021; https://www.dgao-proceedings.de/download/122/122_a13.pdf
    DOI: 10.15488/11521
  • Ziebehl, A.; Biermann, T.; Grabe, T.; Röttger, J.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2021): Potentials and Challenges in Additive Manufacturing of Nanoparticle-infused Silicone OpticsDGaO-Proceedings 2021; https://www.dgao-proceedings.de/download/122/122_a11.pdf
    DOI: 10.15488/11522
  • Ziebehl, A.; Biermann, T.; Grabe, T.; Röttger, J.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2021): Potentials and Challenges in Additive Manufacturing of Nanoparticle-infused Silicone OpticsDGaO Proceedings 2021
    DOI: https://doi.org/10.15488/11522
  • Altun, O.; Wolniak, P.; Mozgova, I.; Lachmayer, R. (2020): An analysis of scaling methods for structural components in the context of size effects and nonlinear phenomenaProceedings of the Design Society: DESIGN Conference, 1, S. 797-806
    DOI: 10.1017/dsd.2020.320
  • Biermann, T.; Grabe, T.; Ley, P.-P.; Hüchting, J.; Lachmayer, R. (2020): Potentials and challenges of additive manufacturing using highly transparent silicone materials, DGaO 2020, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/121/121_p23.pdf
  • Brinker, J., Gembarski, P.C.; Hagen, S.; Thomas, O. (2020): Anwendungspotenziale von Additive Repair und Refurbishment für Service-orientierte GeschäftsmodelleKonstruktion für die Additive Fertigung 2019
    DOI: 10.1007/978-3-662-61149-4_4
  • Chatzizyrli, E.; Wienke, A.; Lachmayer, R.; Neumann, J.; Kracht, D. (2020): Opto-thermal simulation framework for the investigation of phosphor materials in laser-based lighting systemsProceedings of SPIE 11274
    DOI: 10.1117/12.2546052
  • Chatzizyrli, E.; Wienke, A.; Neumann, J.; Lachmayer, R. (2020): Opto-Thermal Simulation of Laser-Excited Remote Phosphor SystemsIn: Lachmayer, R.; Roth, B.; Wolf, A. (Hrsg.): Spatially, Temporally and Spectrally Adapted Light for Applications, S. 9-11
    ISBN: 978-3-95900-424-4
  • Ehlers, T.; Lachmayer, R. (2020): Einsatz additiv gefertigter Partikeldämpfer – eine ÜbersichtIn: Lachmayer, R.; Rettschlag, K.; Kaierle, S. (Hrsg.)(2020): Konstruktion für die Additive Fertigung 2019, Springer Vieweg Verlag, Berlin Heidelberg, S. 123 – 142
    DOI: 10.1007/978-3-662-61149-4_9
    ISBN: 978-3-662-61148-7
  • Ehlers, T.; Lachmayer, R.; Vajna, S.; Halle, T. (2020): ProducibilityIn: Vajna, S. (Hrsg.)(2020): Integrated Design Engineering, Springer Nature Switzerland AG 2020, Cham Switzerland, S. 287 - 323
    DOI: 10.1007/978-3-030-19357-7_9
    ISBN: 978-3-030-19356-0
  • Ehlers, T.; Wurst, J.; Lachmayer, R. (2020): Bewertung der ökologischen und ökonomischen Nachhaltigkeit in der Additiven FertigungIn: Lachmayer, R.; Rettschlag, K.; Kaierle, S. (Hrsg.)(2020): Konstruktion für die Additive Fertigung 2019, Springer Vieweg Verlag, Berlin Heidelberg, S. 177 – 199
    DOI: 10.1007/978-3-662-61149-4_12
    ISBN: 978-3-662-61148-7
  • Ganter, N.; Kloock-Schreiber, D.; Gembarski, P.C.; Lachmayer, R. (2020): Including Maintenance Services in the Solution Space - Considering Life Cycle Costs in Product ConfigurationProceedings of the 22nd International Configuration Workshop (CWS 2020), 10.-11.09.2020, Vicenza, Italy
  • Gembarski, P.C. (2020): Modeling the Portfolio of Capabilities for Product Variant Creation and AssessmentProceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2020), 23.-25.09.2020, Novi Sad, Serbia
  • Gembarski, P.C. (2020): Design Automation Case Study: Trash Rack CleanerProceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2020), 23.-25.09.2020, Novi Sad, Serbia
  • Gembarski, P.C. (2020): Good Idea or Bad Idea? – Teaching Knowledge-Based Engineering in a Flipped ClassroomProceedings of the 22nd International Conference on Engineering and Product Design Education, 10.-11.09.2020, Herning, Denmark
    DOI: DOI: 10.35199/EPDE.2020.53
  • Gembarski, P.C. (2020): Three Ways of Integrating Computer-Aaided-Design and Knowledge-Based-EngineeringProceedings of the Design Society: DESIGN Conference
    DOI: 10.1017/dsd.2020.313
  • Gembarski, P.C. (2020): On the Conception of a Multi-Agent Analysis and Optimization Tool for Mechanical Engineering PartsAgents and Multi-Agent Systems: Technologies and Applications 2020
    DOI: 10.1007/978-981-15-5764-4_9
  • Gembarski, P.C. (2020): The Meaning of Solution Space Modelling and Knowledge-Based Product Configurators for Smart Service SystemsInformation Systems Architecture and Technology: Proceedings of 40th Anniversary International Conference on Information Systems Architecture and Technology – ISAT 2019
    DOI: 10.1007/978-3-030-30440-9_4
  • Gembarski, P.C.; Brinker, J.; Thomas, O. (2020): An extended Key Competence Framework to Mass Customize After-Sales ServicesProceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2020), 23.-25.09.2020, Novi Sad, Serbia
  • Grabe, T.; Biermann, T.; Bayerl, M.; Wolf, A.; Lachmayer, R. (2020): Quantitative analysis of additively manufactured transparent polymer optics, DGaO 2020, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/121/121_b22.pdf
  • Grabe, T.; Budde, J.; Kranert, F.; Wienke, A.; Neumann, J.; Kracht, D.; Lachmayer; R. (2020): Kühlkörper-Designansatz für einen in AlSi10Mg eingebetteten YAG-LaserkristallIn: Lachmayer, R.; Rettschlag, K.; Kaierle, S. (Hrsg.): Konstruktion für die Additive Fertigung 2019, S. 1-10
    DOI: 10.1007/978-3-662-61149-4_11
    ISBN: 978-3-662-61148-7
  • Grabe, T.; Li, Y.; Krauss, H.; Wolf, A.; Wu, J.; Yao, C.; Wang, Q.; Lachmayer, R.; Ren, W. (2020): Freeform optics design for Raman Spectroscopy Proceedings of SPIE 11287
    DOI: 10.1117/12.2544708
  • Held, M. P.; Wolf, A.; Lachmayer, R. (2020): High-Resolution LED Vehicle HeadlightsIn: Lachmayer, R.; Roth, B.; Wolf, A. (Hrsg.): Spatially, Temporally and Spectrally Adapted Light for Applications, S. 18-20
    ISBN: 978-3-95900-424-4
  • Hoppe, L.; Gembarski, P. C.; Plappert, S.; Lachmayer, R. (2020): Anwendung wissensbasierter Konstruktionssysteme zur Lösungsbewertung von CAD-Konstruktionen18. Gemeinsames Kolloquium Konstruktionstechnik 2020: Nachhaltige Produktentwicklung: KT 2020, S 199-208, Universität Duisburg-Essen
    DOI: 10.17185/duepublico/73094
    ISBN: 978-3-940402-43-1
  • Hoppe, L.; Plappert, S.; Gembarski, P.C.; Lachmayer, R. (2020): Development of an Intelligent Tutoring System for Design Education Proceedings of the 22nd International Conference on Engineering and Product Design Education, Herning, Denmark
    DOI: 10.35199/EPDE.2020.46
  • Kloock-Schreiber, D.; Brockmöller, T.; Schneider, J.; Gembarski, P.C.; Mozgova, I.; Lachmayer, R. (2020): TRIZ-Reverse for PSS Potential DeterminationProceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2020), 23.-25.09.2020, Novi Sad, Serbia
  • Kloock-Schreiber, D.; Siqueira, R.; Gembarski, P.C.; Lachmayer, R. (2020): Discrete-Event Simulation for Specification Design of Products in Product-Service SystemsProceedings of the Design Society: DESIGN Conference
    DOI: 10.1017/dsd.2020.295
  • Kranert, F.; Budde, J.; Need, P.; Bernhard, R.; Lammers, M.; Rettschlag, K.; Grabe, T.; Wienke, A.; Neumann, J.; Wiche, H.; Wesling, V.; Ahlers, H.; Lachmayer, R.; Kracht, D. (2020): 3D-printed, low-cost, lightweight optomechanics for a compact, low-power solid state amplifier systemProceedings of SPIE 11261
    DOI: 10.1117/12.2544268
  • Kranert, F.; Rettschlag, K.; Wienke, A.; Hohnholz, A.; Neumann, J.; Jäschke, P.; Kracht, D.; Lachmayer, R. (2020): Generation of functional curved waveguides by CO2-laser based deposition of coreless fused silica fibersProceedings of SPIE 11349
    DOI: 10.1117/12.2554516
  • Lachmayer, R.; Bode, B.; Grabe, T.; Rettschlag, K. (2020): Integration spezifischer Effekte in Strukturbauteilen mittels additiver FertigungsverfahrenIn: Lachmayer, R.; Rettschlag, K.; Kaierle, S. (Hrsg.): Konstruktion für die Additive Fertigung 2019, S. 159-175
    DOI: 10.1007/978-3-662-61149-4_1
    ISBN: 978-3-662-61148-7
  • Lachmayer, R.; Held, M. P.; Roth, B.; Wolf, A. (2020): Tailored LightIn: Lachmayer, R.; Roth, B.; Wolf, A. (Hrsg.): Spatially, Temporally and Spectrally Adapted Light for Applications, S. 7-8
    ISBN: 978-3-95900-424-4
  • Leuteritz, G.; Schudak, S.; Rohling, M.; Lachmayer, R. (2020): Formschlüssige multimaterielle Additive Fertigung zur Realisierung funktionsintegrierter Hybrid-BauteileIn Lachmayer, R.; Lippert, R. B.; Kaierle, S. (Hrsg.): Konstruktion für die Additive Fertigung 2018, S. 299-317
    DOI: 10.1007/978-3-662-59058-4
    ISBN: 978-3-662-59058-4
  • Leuteritz, G.; Wolf, A.; Lachmayer, R. (2020): Additive Manufacturing of Reflectors for Miniaturized Optical SystemsIn: Lachmayer, R.; Roth, B.; Wolf, A. (Hrsg.): Spatially, Temporally and Spectrally Adapted Light for Applications, S. 30-32
    ISBN: 978-3-95900-424-4
  • Ley, P.-P., August, J., & Lachmayer, R. (2020): Design Tool to Develop Highly Efficient Optomechatronic SystemsProceedings of the Design Society: DESIGN Conference, 1, S. 305-314
    DOI: 10.1017/dsd.2020.270
  • Ley, P.-P.; Lachmayer, R. (2020): Hybrid Ray TracingDGaO Proceedings 2020, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/121/121_b28.pdf
    DOI: 10.15488/9927
  • Ley, P.-P.; Wirths, L.; Oleff, C.; Jungreitmayr, F.; Vajna, S.; Paetzold, K.; Borg, J. (2020): A Methodical Approach to Integrated Product Development in Total Hip ArthroplastyProceedings of the Design Society: DESIGN Conference, 1, S. 2009-2018
    DOI: 10.1017/dsd.2020.271
  • Li, H.; Brockmöller, T.; Gembarski, P.C.; Lachmayer, R. (2020): An Investigation of Generative Parametric Design Approach for Robust Solution DevelopmentProceedings of the Design Society: DESIGN Conference
    DOI: 10.1017/dsd.2020.273
  • Li, Y., Wolf, A.; Lachmayer, R. (2020): Laser LCoS High-Resolution HeadlampIn: Lachmayer, R.; Roth, B.; Wolf, A. (Hrsg.): Spatially, Temporally and Spectrally Adapted Light for Applications, S. 33-35
    ISBN: 978-3-95900-424-4
  • Li, Y.; Knöchelmann, M.; Lachmayer, R. (2020): An innovative concept for the next-generationThe 8th International Forum on Automotive Lighting (IFAL), Shanghai
    DOI: /10.15488/9877
  • Müller, P.; Gembarski, P. C.; Lachmayer, R. (2020): Detektion von Konstruktionsfehlern durch eine automatisierte Objekterkennung mittels Deep Learning18. Gemeinsames Kolloquium Konstruktionstechnik 2020: Nachhaltige Produktentwicklung: KT 2020., S 101-112, Universität Duisburg-Essen
    DOI: https://doi.org/10.15488/11539
    ISBN: 978-3-940402-43-1
  • Oldenziel, E.; Ohnemus L.; Saralajew, S. (2020): Provident Detection of Vehicles at Night2020 IEEE Intelligent Vehicles Symposium (IV), Las Vegas, NV, USA, S. 472-479
    DOI: 10.1109/IV47402.2020.9304752
  • Plappert, S.; Gembarski, P. C.; Lachmayer, R. (2020): The Use of Knowledge-Based Engineering Systems and Artificial Intelligence in Product Development: A SnapshotInformation Systems Architecture and Technology: Proceedings of 40th Anniversary International Conference on Information Systems Architecture and Technology – ISAT 2019
    DOI: 10.1007/978-3-030-30604-5_6
  • Plappert, S.; Gembarski, P.C.; Lachmayer, R. (2020): Product Configuration with Bayesian NetworkProceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2020), 23.-25.09.2020, Novi Sad, Serbia
  • Plappert, S.; Gembarski, P.C.; Lachmayer, R. (2020): Decision-Making with Probabilistic Reasoning in Engineering DesignFoundations of Intelligent Systems. ISMIS 2020. Lecture Notes in Computer Science, vol. 12117, Publisher: Springer, Cham
    DOI: DOI: 10.1007/978-3-030-59491-6_6
  • Plappert, S.; Hoppe, L.; Gembarski, P.C.; Lachmayer, R. (2020): Application of Knowledge-Based Engineering for Teaching Design Knowledge to Design StudentsProceedings of the Design Society: DESIGN Conference
    DOI: 10.1017/dsd.2020.300
  • Rettschlag, K.; Kramprich, S. (2020): Printing complex glass structures in 3D using the laserphi, online verfügbar unter https://www.phi-hannover.de/startseite/artikel/detail/printing-complex-glass-structures-in-3d-using-the-laser/
  • Rettschlag, K.; Wolf, A.; Lachmayer, R. (2020): Materialcharakterisierung transparenter Kunststoffe für die Additive FertigungIn: Lachmayer, R.; Lippert, R. B.; Kaierle, S. (Hrsg.): Konstruktion für die Additive Fertigung 2018, Springer Verlag, S. 193-207
    DOI: 10.1007/978-3-662-59058-4
    ISBN: 978-3-662-59058-4
  • Rettschlag, K; Hohnholz, A.; Jäschke, P.; Kracht, D.; Kaierle, S.; Lachmayer, R. (2020): Laser glass deposition of spheres for printing micro lensesProc. CIRP 94, S. 276-280
    DOI: 10.1016/j.procir.2020.09.052
  • Schneider, J.; Gatzen, M.; Lachmayer, R. (2020): The importance of considering fleet size in the lifecycle cost analysis of product service systemsProceedings of the Design Society: Design Conference, 1, S. 1365 – 1374
    DOI: 10.1017/dsd.2020.284
  • Schneider, J.; Mozgova, I.; Lachmayer, R. (2020): Product-service systems as an economical solution to improve the sustainability of productsProceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2020)
  • Weigt, B.; Homeyer, K.; Lachmayer, R. (2020): Bestimmung der Halbleiterparameter einer kommerziellen LED während der Alterung durch KapazitätsmessungDGaO Proceedings 2020, ISSN 1614-8436, https://www.dgao-proceedings.de/download/121/121_p2.pdf
  • Wolniak, P.; Kloock-Schreiber, D.; Sauthoff, B.; Lachmayer, R. (2020): Integrating Architectural Design Changes In Computer-aided Design Optimization9th International Conference on Mass-Customization and Personalization – Community of Europe (MCP-CE 2020)
  • Wolniak, P.; Sauthoff, B.; Kloock-Schreiber, D.; Lachmayer, R. (2020): Automated Product Functionality and Design Optimization Instancing a Product-Service SystemProceedings of the Design Society: DESIGN Conference, pp. 1405–1414
    DOI: 10.1017/dsd.2020.323
  • Chatzizyrli, E.; Wienke, A.; Lachmayer, R.; Neumann, J.; Kracht, D. (2019): Structured Auxiliary Mesh (SAM) algorithm for opto-thermal simulation of laser-based lighting systemsConference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, OSA Technical Digest (Optical Society of America, 2019), paper ej_p_11.
  • Ehlers, T.; Lippert, R. B.; Lachmayer, R. (2019): Bewertung von Strukturbauteilen aus gradierten Materialien für Selektives LaserstrahlschmelzenIn: Lachmayer, R.; Lippert, R. B.; Kaierle, S. (Hrsg.)(2019): Konstruktion für die Additive Fertigung 2018, Springer Vieweg Verlag, Berlin Heidelberg, S. 109 – 127
    DOI: 10.1007/978-3-662-59058-4_7
    ISBN: 978-3-662-59057-7
  • Held, M. P.; Kloppenburg, G.; Lachmayer, R. (2019): Micro pixel LEDs: design challenge and implementation for high-resolution headlampsProceedings of SPIE 10940
    DOI: 10.1117/12.2509336
  • Khan, M. S.; Rahlves, M.; Lachmayer, R.; Roth, B. (2019): Low cost fabrication of polymer based optical devicesDGaO-Proceedings 2019, ISSN 1646-8436, online verfügbar unter https://www.dgao-proceedings.de/download/120/120_a34.pdf
  • Kloock-Schreiber, D.; Domarkas, L.; Gembarski, P.C.; Lachmayer, R. (2019): Enrichment of Geometric CAD Models for Service ConfigurationProceedings of the 21st International Configuration Workshop (CWS 2019), Hamburg, September 19 - 20, 2019
  • Knöchelmann, M.; Ley, P.-P.; Kloppenburg, G.; Mozgova, I.; Lachmayer, R. (2019): Methodische Entwicklung eines opto-mechatronischen Systems am Beispiel eines hochadaptiven FahrzeugscheinwerfersTagungsband der VDI Fachtagung Mechatronik 2019. Paderborn: Universität Padeborn
    DOI: 10.15488/4683
  • Leuteritz, G.; Lachmayer, R. (2019): Concepts for integrating laser polishing into an additive manufacturing systemProceedings of SPIE 10909
    DOI: 10.1117/12.2509447
  • Ley, P.-P.; Knöchelmann, M.; Kloppenburg, G.; Lachmayer, R. (2019): Development Methodology for Optomechatronic Systems Using the Example of a High-Resolution Projection ModuleProceedings of the Design Society: International Conference on Engineering Design, Vol. 1, Iss. 1, pp. 2547-2556
    DOI: 10.1017/dsi.2019.261
  • Ley, P.-P.; Lachmayer, R. (2019): Imaging and non-imaging illumination of DLP for high resolution headlampsProceedings of SPIE 10932
    DOI: 10.1117/12.2507436
  • Li, Y.; Grabe. T.; Lachmayer, R. (2019): Investigation on RGB Laser LCoS High-resolution HeadlampsDGaO-Proceedings 2019, ISSN 1646-8436, online verfügbar unter https://www.dgao-proceedings.de/download/120/120_b7.pdf
    DOI: 10.15488/5484
  • Li, Y.; Knöchelmann, M.; Lachmayer, R. (2019): Concepts of inhomogeneous illumination of area-based light modulators for high-resolution headlampsProceedings of SPIE 10932
    DOI: 10.1117/12.2508620
  • Li, Y.; Knöchelmann, M.; Lachmayer, R. (2019): High-resolution headlamps: Innovative functionalities and the potential of using laser diodes as light sources7th International Forum on Automotive Lighting (IFAL), Shanghai
    DOI: 10.15488/5333
  • Rettschlag, K.; Leuteritz, G.; Lachmayer, R. (2019): Comparison of laser polishing effects for different materialsDGaO-Proceedings 2019, ISSN 1646-8436, online verfügbar unter https://www.dgao-proceedings.de/download/120/120_p38.pdf
  • Roth, J., Thamm, M., Held, M., Lachmayer, R. (2019): Micro-Pixel-LED-HeadlightsProceedings of the 13th International Symposium on Automotive Lighting (ISAL), pp. 259-268
    ISBN: 978-3-8316-4818-4
  • Schneider, J.; Mozgova, I.; Lachmayer, R. (2019): An Approach for Choosing the Cost Effective Design for a Product-Service System While Maintaining its Desired ReliabilityProceedings of the Design Society: International Conference on Engineering Design, Vol. 1, pp. 3041 - 3050
    DOI: 10.1017/dsi.2019.311
  • Siqueira, R.; Lachmayer, R. (2019): A Manufacture constrained design methodology application for a Tailored Forming Hybrid ComponentIn: Dröder K., Vietor T. (Hrsg.) Technologies for economical and functional lightweight design. Zukunftstechnologien für den multifunktionalen Leichtbau. Springer Vieweg, Berlin, Heidelberg, S. 133-143
    DOI: 10.1007/978-3-662-58206-0_13
  • Wolniak, P.; Sauthoff, B.; Lachmayer, R.; Mozgova, I. (2019): Scaling of Technical Systems Using an Object-Based Modelling ApproachProceedings of the Design Society: International Conference on Engineering Design, Vol. 1, pp. 1603–1612
    DOI: 10.1017/dsi.2019.166
  • Chatzizyrli, E.; Tinne, N.; Lachmayer, R.; Neumann, J.; Kracht, D. (2018): Opto-thermal simulation model for optimizing laser-excited remote phosphor systemsProceedings of SPIE 10693
    DOI: 10.1117/12.2312644
  • Chatzizyrli, E.; Tinne, N.; Lachmayer, R.; Neumann, J.; Kracht, D. (2018): Multiphysics simulation strategy for the optimization of laser-excited remote phosphor systemsDGaO Proceedings 2018, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/119/119_p50.pdf
  • Ehlers, T.; Lippert, R. B. Lachmayer, R. (2018): An Approach to Design Functionally Graded Materials using Additive ManufacturingSymposium Lightweight Design in Product Development, S. 57 - 60
  • Gembarski, P. C.; Lachmayer, R. (2018): The Parameter Space Matrix as Planning Tool for Geometry-based Solution SpacesProceedings of the 8th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2018), Novi Sad, Serbien, 19.09.-21.09.2018
  • Gembarski, P. C.; Lachmayer, R. (2018): Complexity Management of Solution Spaces in Mass CustomizationProceedings of the 8th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2018), Novi Sad, Serbien, 19.09.-21.09.2018
  • Gembarski, P. C.; Lachmayer, R. (2018): The Hanover Knowledge-Based-Design-Lab: A Project-Oriented Capstone Course in Engineering DesignProceedings of the 20th International Conference on Engineering and Product Design Education (E&PDE2018), London, UK, 06.09.-07.09.2018
  • Gembarski, P. C.; Schreiber, D.; Schoormann, T.; Knackstedt, R.; Lachmayer, R. (2018): “Are we talking about the same thing?” Analyzing Effects of Mass Customization and Product-Service Systems on SustainabilityProceedings of the 8th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2018), Novi Sad, Serbien, 19.09.-21.09.2018
  • Held, M. P.; Ley, P.-P.; Lachmayer, R. (2018): Calculation comparison of an additive and subtractive light modulator for high-resolution pixellight headlampsProceedings of SPIE 10554
    DOI: 10.1117/12.2290238
  • Held, M. P.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2018): Anforderungen an die Ausleuchtung von LichtmodulatorenDGaO Proceedings 2018, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/119/119_p46.pdf
    DOI: 10.15488/4084
  • Ilango, S.; Knöchelmann, M.; Kahrs, L. A.; Wolf, A.; Ortmaier, T.; Lachmayer, R. (2018): User evaluation study on illumination requirements to design an augmented reality projector for open liver surgeryProceedings of SPIE 10693
    DOI: 10.1117/12.2309667
  • Khan, M. S.; Rahlves, M.; Roth, B.; Lachmayer. R. (2018): Laser based projection system for traffic collision preventionDGaO Proceedings 2018, ISSN 1614-8436, https://www.dgao-proceedings.de/download/119/119_p48.pdf
  • Knöchelmann, M.; Kloppenburg, G.; Lachmayer, R. (2018): Headlamp Innovations: Optical concepts for fully adaptive light distributionsProceedings of SPIE 10546
    DOI: 10.1117/12.2290013
  • Knöchelmann, M.; Wolf, A.; Kloppenburg, G.; Lachmayer, R. (2018): Aktiver Scheinwerfer mit DMD-Technologie zur Erzeugung vollständiger LichtverteilungenVDI Berichte 2323, S. 61-78
    DOI: 10.15488/3975
    ISBN: 978-3-18-092323-9
  • Leuteritz, G.; Demminger, C.; Maier, H. J.; Lachmayer, R. (2018): Hybride Additive Fertigung: Ansätze zur Kombination von additiven und gießtechnischen Fertigungsverfahren für die SerienfertigungIn Lachmayer, R.; Lippert, R.B.; Kaierle, S. (Hrsg.): Additive Serienfertigung; S. 115-126. Springer Vieweg, Berlin, Heidelberg.
    DOI: 10.1007/978-3-662-56463-9
    ISBN: 978-3-662-56463-9
  • Leuteritz, G.; Lachmayer, R. (2018): Additive manufacturing of reflective optics: evaluating finishing methodsProceedings of SPIE 10523
    DOI: 10.1117/12.2289998
  • Leuteritz, G.; Lippert. R. B.; Rettschlag, K.; Lachmayer, R. (2018): Comparison of Additive Manufacturing techniques regarding mechanical and optical propertiesDGaO Proceedings 2018, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/119/119_a1.pdf
  • Leuteritz, G.; Rohling, M.; Lachmayer, R. (2018): Functional integration for additively manufactured reflectorsDGaO Proceedings 2018, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/119/119_p54.pdf
  • Ley, P.-P.; Held, M. P.; Lachmayer, R. (2018): Analysis of LED arrangement in an array with respect to lens geometryProceedings of SPIE 10554
    DOI: 10.1117/12.2290253
  • Ley, P.-P.; Held, M. P.; Wolf, A.; Lachmayer, R. (2018): Konzepte zur Beleuchtung von LichtmodulatorenDGaO Proceedings 2018, ISSN: 1614-8436 https://www.dgao-proceedings.de/download/119/119_p47.pdf
    DOI: 10.15488/4085
  • Li, H.; Gembarski, P. C.; Lachmayer, R. (2018): Template-Based Design for Design Co-CreationProceedings of the 5th International Conference on Design Creativity (ICDC2018), Bath, UK, 31.01.-02.02.2018
  • Li, H.; Lachmayer, R. (2018): Generative Design Approach for Modeling Creative DesignsIOP Conference Series: Materials Science and Engineering, 408, 012035
    DOI: 10.1088/1757-899X/408/1/012035
  • Mozgova, I., Yanchevskyi,I., Lachmayer, R. (2018): Prediction of the Residual Life of a Component under Intensive Random Dynamic Loading within the Scope of Technical Inheritance15th International Design Conference, 21-24 May 2018, Dubrovnik, Croatia, S. 1643-1650
    DOI: https://doi.org/10.21278/idc.2018.0511
  • Rizvi, S.; Ley, P.-P.; Knöchelmann, M.; Lachmayer, R. (2018): Road safety enhancement: An investigation on the visibility of on-road image projections using DMD-based pixel light systemsProceedings of SPIE 10554
    DOI: 10.1117/12.2290456
  • Scheidel, W.; Mozgova, I.; Lachmayer, R. (2018): Teaching Industry 4.0 - Product Data Management for Small and Medium-Sized EnterprisesProceedings of the 20th Internation Conference on Engineering and Product Design Education, S. 151-156
    ISBN: 978-1-912254-02-6
  • Scheidel, W.; Mozgova, I.; Lachmayer, R. (2018): A case study for a unified designation of development information in a PDM System for Industry 4.0 productsProcedia Manufacturing 24, 2–7
    DOI: 10.1016/j.promfg.2018.06.002
  • Schöneich, M.; Neumann, C.; Lachmayer, R. (2018): Auswirkungen von Mesostrukturen in Fahrzeuginnenraum auf die ReflexionseigenschaftenVDI Berichte 2323, S. 219-231
    ISBN: 978-3-18-092323-9
  • Schreiber, D.; Gembarski, P. C.; Lachmayer, R. (2018): Developing a Constraint-Based Solution Space for Product-Service SystemsProceedings of the 8th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2018), Novi Sad, Serbien, 19.09.-21.09.2018
  • Siqueira, R.; Bibani, M.; Mozgova, I.; Lachmayer, R. (2018): Case-Based Parametric Analysis: A Method for Design of Tailored Forming Hybrid Material ComponentISAT 2018 Proceedings, Springer Verlag, S. 14-28
    DOI: 10.1007/978-3-319-99996-8_2
  • Wolniak, P., Mozgova, I., Lachmayer, R. (2018): Concept for the Implementation of a Scaling Strategy into the Paradigm of Technical Inheritance4th International Conference on System-Integrated Intelligence, 19-20 June 2018, Hannover, Germany, Procedia Manufacturing, Vol. 24, S. 80–85
    DOI: 10.1016/j.promfg.2018.06.012
  • Wolniak, P., Sauthoff, B., Lachmayer, R. (2018): Scaling of Structural Components by Knowledge-Based Engineering Methods15th International Design Conference, 21-24 May 2018, Dubrovnik, Croatia, S. 1757-1768
    DOI: 10.21278/idc.2018.0234
  • Albers, A.; Bursac, N.; Marthaler, F.; Siebe, A.; Reiß, N.; Bender, B.; Binz, H.; Krause, D.; Lachmayer, R.; Matthiesen, S.; Vietor, T. (2017): Szenarien der Methodenanwendung - Ein White-Paper für die MethodenforschungKonstruktion online 2017, Ausgabe 11-12
  • Asadi, N.; Guaragni, F.; Johannknecht, F.; Saidani, M.; Scholle, P.; Borg, J.; Panasiuk, D. (2017): Success factors of an IPD based approach in a remote multidisciplinary team environment - Reflections on a case studyProceedings of the 21st International Conference on Engineering Design (ICED17), Vol. 9: Design Education, Vancouver, Canada, 21.-25.08.2017
    ISBN: 978-1-904670-97-1
  • Bibani, M.; Gembarski, P. C.; Lachmayer, R. (2017): Ein wissensbasiertes System zur Konstruktion von StaubabscheidernDfX-Symposium 04-05.10, Bamberg
    ISBN: 978-3-946094-20-3
  • Brockmöller, T.; Gembarski, P. C.; Mozgova, I.; Lachmayer, R. (2017): Design Catalogue in a CAE Environment for the Illustration of Tailored Forming59th Ilmenau Scientific Colloquium, 11-15 September, Ilmenau
  • Brockmöller, T.; Mozgova, I.; Lachmayer, R. (2017): An Approach to Analyse the Potential of Tailored Forming by TRIZ ReverseProccedings of the 21st International Conference on Engineering Design (ICED 17) Vol 4: Design Methods and Tools, pp. 445-452, Vancouver, Canada, 21-25 August
    ISBN: 978-1-904670-92-6
  • Chatzizyrli, E.; Tinne, N.; Lachmayer, R.; Neumann, J.; Kracht, D. (2017): Modeling of photoluminescence in laser-based lighting systemsSPIE Proceedings - volume on Photonics, Devices and Systems VII 2017
  • Gembarski, P. C.; Lachmayer, R. (2017): Teaching solution space development: Experiences from the Hanover Knowledge-Based-Design-LabProceedings of the 9th World Conference on Mass Customization, Personalization and Co-Creation (MCPC 2017), Aachen, Germany, 20.-21.11.2017
  • Gembarski, P. C.; Lachmayer, R. (2017): Ein Beitrag zur Modellierung konstruktiver LösungsräumeTagungsband des Stuttgarter Symposiums für Produktentwicklung 2017 (SSP2017), 29.06.2017, Stuttgart
  • Gembarski, P. C.; Schoormann, T.; Schreiber, D.; Knackstedt, R.; Lachmayer, R. (2017): Effects of Mass Customization on Sustainability - A Literature-based AnalysisProceedings of the 9th World Conference on Mass Customization, Personalization and Co-Creation (MCPC 2017), Aachen, Germany, 20.-21.11.2017
  • Gembarski, P. C.; Wellmann, T.; Fleige, H.-U.; Lachmayer, R. (2017): Entwicklungsprozess zur wissensbasierten PrüfstandskonstruktionTagungsband des Stuttgarter Symposiums für Produktentwicklung 2017 (SSP2017), 29.06.2017, Stuttgart
  • Held, M. P.; Lachmayer, R. (2017): Efficient conceptual design of an LED-based pixel light vehicle headlampsProc. SPIE 10603
    DOI: 10.1117/12.2292741
  • Johannknecht, F.; Gatzen, M. M.; Lachmayer, R. (2017): Systematic Approach to Optimize Cost Drivers Based on Life Cycle Cost ModelingProceedings of the 21st International Conference on Engineering Design (ICED17), Vol. 5: Design for X, Design to X, Vancouver, Canada, 21.-25.08.2017
    ISBN: 978-1-904670-93-3
  • Khan, M. S.; Rahlves, M.; Roth, B.; Lachmayer, R. (2017): Diffractive Optical Elements: A Novel Concept for Automotive LightingDGaO-Proceedings 2017
    ISBN: ISSN: 1614-8436; http://www.dgao-proceedings.de/download/118/118_p17.pdf
  • Kloppenburg, G.; Knöchelmann, M.; Wolf, A. (2017): Additive Fertigung transparenter OptikenIn: R. Lachmayer, R. B. Lippert (Hrsg.): Additive Manufacturing Quantifiziert - Visionäre Anwendungen und Stand der Technik, Springer Vieweg Verlag, S. 163-174
    ISBN: 978-3-662-54112-8
  • Kusch, A.; Wurz, M.; Held, M. P.; Wolf, A.; Lachmayer, R. (2017): LED packaging with optimized heat dissipation for a micro LED arrayIn T. Otto (Hrsg.): Smart Systems Integration, S. 399-402
    ISBN: 978-3-95735-057-2
  • Lachmayer, R.; Mozgova, I.; Sauthoff, B.; Gottwald, P.; Scheidel, W. (2017): Algorithmic design evolution based on product lifecycle informationIn: Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle: Genetics and Intelligence – Keys to Industry 4.0, B. Denkena, T. Mörke (Hrsg.), Academic Press, pp. 415-437
    ISBN: eBook: 9780128126004, Paperback: 9780128119396.
  • Leuteritz, G.; Lippert, R. B.; Lachmayer, R. (2017): Optimizing Selective Laser Melting for Reflective OpticsDGaO-Proceedings 2017
    ISBN: ISSN: 1614-8436; http://www.dgao-proceedings.de/download/118/118_b6.pdf
  • Ley, P. P.; Held, M. P.; Wolf, A.; Lachmayer, R. (2017): Konzepte für hochauflösende Fahrzeugscheinwerfer unter Berücksichtigung der ÉtendueDGaO-Proceedings 2017
    DOI: 10.15488/4086
    ISBN: ISSN: 1614-8436; http://www.dgao-proceedings.de/download/118/118_p19.pdf
  • Lippert, R. B. (2017): Restriktionsgerechte Gestaltung innerer Strukturen für das Selektive LaserstrahlschmelzenR. Lachmayer, R. B. Lippert (Hrsg.): Additive Manufacturing Quantifiziert - Visionäre Anwendungen und Stand der Technik, S. 23 - 48, Springer Vieweg Verlag, Berlin Heidelberg, Mai 2017
    ISBN: 978-3-662-54112-8
  • Lippert, R. B.; Ahrens, M.; Dekhiar, j.; Louhichi, R.; Song, Y.-W.; Toepfer, F.; Briede, J.; Vajna, S.; Paetzold, K.; Borg, J. (2017): Integrated product development project in a multi-cultural and multi-professional background team: challenges and key success factorsProceedings of the 21st International Conference on Engineering Design (ICED17), Vol. 9: Design Education, Vancouver, Canada, 21.-25.08.2017, ISSN 2220-4342, https://www.designsociety.org/download-publication/39883/Integrated+product+development+project+in+a+multi-cultural+and+multi-professional+background+team%3A+challenges+and+key+success+factors
    ISBN: 978-1-904670-93-3
  • Lippert, R. B.; Lachmayer, R. (2017): Einflussfaktoren innerer Strukturen im Gestaltungsprozess von Strukturbauteilen für das selektive LaserstrahlschmelzenProceedings of the 14th Rapid.Tech International Trade Show & Conference for Additive Manufacturing (Rapid.Tech), Erfurt, Germany, 20. - 22. Juni 2017
    ISBN: 978-3-446-45459-0
  • Lippert, R. B.; Lachmayer, R. (2017): A design method for restriction oriented lightweight design by using selective laser meltingProceedings of the 21st International Conference on Engineering Design (ICED17), Vol. 5: Design for X, Design to X, Vancouver, Canada, 21.-25.08.2017, ISSN 2220-4342, https://www.designsociety.org/download-publication/39722/A+design+method+for+restriction+oriented+lightweight+design+by+using+selective+laser+melting
    ISBN: 978-1-904670-93-3
  • Lippert, R. B.; Lachmayer, R. (2017): A Design Method for SLM-Parts Using Internal Structures in an Extended Design SpaceM. Meboldt and C. Klahn (eds.), Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017, Zürich, Schweiz, 12.-15.09.2017
    ISBN: 978-3-319-66865-9
  • Lippert, R. B.; Leuteritz, G.; Lachmayer, R. (2017): An approach to implement design for additive manufacturing in engineering studiesProceedings of the 21st International Conference on Engineering Design (ICED17), Vol. 5: Design for X, Design to X, Vancouver, Canada, 21.-25.08.2017, ISSN 2220-4342, https://www.designsociety.org/download-publication/39727/An+approach+to+implement+design+for+additive+manufacturing+in+engineering+studies
    ISBN: 978-1-904670-93-3
  • Mozgova, I. (2017): Intelligente Datenanalyse für die Entwicklung neuer ProduktgenerationenWissenschaftsforum Intelligente Technische Systeme (WInTeSys), 11. und 12.05.2017, Paderborn, Germany. Vol. 369, Heinz Nixdorf Institut, pp. 335-346.
  • Mozgova, I.; Barton, S.; Demminger, C.; Miebach, T.; Taptimthong, P.; Lachmayer, R.; Nyhuis, P.; Reimche, W.; Wurz, M. C. (2017): Technical Inheritance: Information basis for the identification and development of product generationsProceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 6: Design Information and Knowledge, Vancouver, Canada, 21-25.08.2017, pp. 091-100
    ISBN: ISBN: 978-1-904670-94-0, ISSN: 2220-4342
  • Pfullmann, N.; Thiel, A.; Thamm, M.; Plöger, R.; Kloppenburg, G.; Wolf, A.; Lachmayer, R. (2017): From mechanical ADB systems to high resolution headlamps – new opportunities of novel headlight systemsProceedings of the 12th International Symposium on Automotive Lighting (ISAL), S. 357-365
    ISBN: 978-3-8316-4672-2
  • Rizvi, S.; Knöchelmann, M.; Ley, P. P.; Lachmayer, R. (2017): Survey of on-road image projection with pixel light systemsProc. SPIE 10603, Photonics, Devices, and Systems VII, 1060314
    DOI: 10.1117/12.2292740
  • S. Schulz; A. Seibel; D. Schreiber; J. Schlattmann (2017): Sensor Concept for Solving the Direct Kinematics Problem of the Stewart-Gough PlatformProceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 1959−1964, Vancouver, Canada, 2017
    DOI: 10.1109/IROS.2017.8206015
  • Scheidel, W.; Mozgova, I.; Lachmayer, R. (2017): Product Data Management in the Context of Industry 4.059th Ilmenau Scientific Colloquium, 11-15 September, Ilmenau
  • Scheidel, W.; Mozgova, I.; Lachmayer, R. (2017): Structuring Information in Technical Inheritance by PDM SystemsIn Proceeding of ICED17-21st International Conference on Engineering Design, Vancouver, Canada, 21-25 August 2017
  • Schreiber, D.; Gembarski, P. C.; Lachmayer, R. (2017): Datamodels for PSS Development and Configuration: Existing Approaches and Future ResearchProceedings of the 9th World Conference on Mass Customization, Personalization and Co-Creation (MCPC 2017), Aachen, Germany, 20.-21.11.2017
  • Schreiber, D.; Gembarski, P. C.; Lachmayer, R. (2017): Modeling and configuration for Product-Service Systems: State of the art and future researchProceedings of the 19th International Configuration Workshop (CWS 2017), Paris, September 14 - 15, 2017
    ISBN: 978-2-9516606-2-5
  • Siqueira, R.; Mozgova, I.; Lachmayer, R. (2017): Development of a topology optimization method for tailored forming multi-material design 24th ABCM International Congress of Mechanical Engineering December 3-8, 2017, Curitiba, PR, Brazil
    DOI: 10.26678/ABCM.COBEM2017.COB17-0079
  • Zghair, Y. A.; Leuteritz, G. (2017): Additive Repair von Multimaterialsystemen im Selektiven LaserstrahlschmelzenIn: R. Lachmayer, R. B. Lippert (Hrsg.): Additive Manufacturing Quantifiziert - Visionäre Anwendungen und Stand der Technik, Springer Vieweg Verlag, S. 195-215
    ISBN: 978-3-662-54112-8
  • Gembarski, P. C. (2016): Das Potenzial zur ProduktindividualisierungIn: Lachmayer, R.; Lippert, R. B.; Fahlbusch, T. (Hrsg.) (2016): 3D-Druck beleuchtet - Additive Manufacturing auf dem Weg in die Anwendung, Springer Vieweg, Berlin Heidelberg ISBN: 978-3-662-49055-6
  • Gembarski, P. C.; Bibani, M.; Lachmayer, R. (2016): Design Catalogues: Knowledge Repositories for Knowledge-Based-Engineering ApplicationsIn: Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N.; Škec, S.: Proceedings of the DESIGN 2016 14th International Design Conference
  • Gembarski, P. C.; Lachmayer, R. (2016): Mass Customization und Product-Service-Systems: Vergleich der Unternehmenstypen und der EntwicklungsumgebungenIn: Tagungsband der Dienstleistungsmodellierung 2016 (DLM 2016), Karlsruhe, 2016. (ausgezeichnet mit dem Best Paper Award)
  • Gembarski, P. C.; Lachmayer, R. (2016): Impact of Rule-Based Systems on Product ComplexityIn: Anisic, Z.; Forza, C.: Proceedings of the 7th International Conference on Mass Customization and Personalisation in Central Europe (MCP-CE 2016), 21.-23.09.2016, Novi Sad, Serbien
  • Gembarski, P. C.; Lachmayer, R. (2016): Business Models for Customer Co-DesignIn: Anisic, Z.; Forza, C.: Proceedings of the 7th International Conference on Mass Customization and Personalisation in Central Europe (MCP-CE 2016), 21.-23.09.2016, Novi Sad, Serbien
  • Gembarski, P. C.; Sauthoff, B.; Brockmöller, T.; Lachmayer, R. (2016): Operationalization of Manufacturing Restrictions for CAD and KBE-SystemsIn: Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N.; Škec, S.: Proceedings of the DESIGN 2016 14th International Design Conference
  • Johannknecht, F.; Gatzen, M. M.; Hahn, D.; Lachmayer, R. (2016): Holistic Life Cycle Costing Approach for Different Development Phases of Drilling ToolsOnePetro, International Petroleum Technology Conference, Bangkok
    ISBN: 978-1-61399451-1
  • Johannknecht, F.; Lippert, R. B. (2016): Nachhaltigkeit und Business CaseIn: Lachmayer, R. et. al (Hrsg.): 3D-Druck beleuchtet – Additive Manufacturing auf dem Weg in die Anwendung, Springer Verlag, S. 31-44
    ISBN: 978-3-662-49055-6
  • Kloppenburg, G.; Roth, J.; Wolf, A.; Lachmayer, R. (2016): Optische Eigenschaften eines RGB-Laserprojektionsmoduls für den VerkehrsraumVDI-Berichte 2278, 7. VDI-Tagung: Optische Technologien in der Fahrzeugtechnik 2016, VDI-Verlag, Düsseldorf, 2016, pp. 255–267
    DOI: 10.15488/4005
    ISBN: 978-3-18-092278-2
  • Kloppenburg, G.; Wolf, A. (2016): Eigenschaften und Validierung optischer KomponentenLachmayer, R. (Hrsg.) et. al: 3D-Druck beleuchtet – Additive Manufacturing auf dem Weg in die Anwendung, Springer Verlag, S. 87-102
    DOI: 10.1007/978-3-662-49056-3
    ISBN: 978-3-662-49055-6
  • Lachmayer, R.; Lippert, R. B. (2016): Chancen und Herausforderungen für die ProduktentwicklungLachmayer, R.; Lippert, R. B.; Fahlbusch, T. (Hrsg.): 3D-Druck beleuchtet - Additive Manufacturing auf dem Weg in die Anwendung, S. 5 - 18, Springer Vieweg Verlag, Berlin Heidelberg, Mai 2016
    ISBN: 978-3-662-49055-6
  • Lachmayer, R.; Zghair, Y. A.; Klose, C.; Nürnberger, F. (2016): Introducing Selective Laser Melting to Manufacture Machine ElementsProceedings of the DESIGN 2016 14th International Design Conference, S.831 - 842, Dubrovnik, Croatia, 16.-19.05.2016
  • Lippert, R. B. (2016): Gestaltung von Additive Manufacturing BauteilenLachmayer, R.; Lippert, R. B.; Fahlbusch, T. (Hrsg.): 3D-Druck beleuchtet - Additive Manufacturing auf dem Weg in die Anwendung, S. 45 - 56, Springer Vieweg Verlag, Berlin Heidelberg, Mai 2016
    ISBN: 978-3-662-49055-6
  • Lippert, R. B.; Lachmayer, R. (2016): Restriktionsgerechte Bauteilgestaltung für das Selektive LaserstrahlschmelzenProceedings of the 13th Rapid.Tech International Trade Show & Conference for Additive Manufacturing (Rapid.Tech), Erfurt, Germany, 14. - 16. Juni 2016
    ISBN: 978-3-446-45017-2
  • Lippert, R. B.; Lachmayer, R. (2016): Bionic inspired Infill Structurs for a Light-Weight Design by using SLMProceedings of the 14th International Design Conference (DESIGN), S.331 - 340, Dubrovnik, Croatia, 16. - 19. Mai 2016, ISSN 1847-9073, https://www.designsociety.org/download-publication/38843/BIONIC+INSPIRED+INFILL+STRUCTURES+FOR+A+LIGHT-WEIGHT+DESIGN+BY+USING+SLM
  • Lippert, R. B.; Lachmayer, R. (2016): Topology Examination for Additive Manufactured Aluminum ComponentsProceedings of the 3rd Fraunhofer Direct Digital Manufacturing Conference (DDMC16), Berlin, Germany, 16. - 17. März 2016
    ISBN: 978-3-8396-1001-5
  • Sauthoff, B.; Gembarski, P. C.; Lachmayer, R. (2016): Maturity-Model-Based Design of Structural ComponentsIn: Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N.; Škec, S.: Proceedings of the DESIGN 2016 14th International Design Conference
  • Wippo, V.; Rettschlag, K.; Surjoseputro, W.; Jäschke, P.; Suttmann, O.;Ziegmann, G.; Overmeyer, L. (2016): Laser transmission welding of SIPN-CompositesProc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
  • Wolf, A.; Kloppenburg, G.; Danov, R.; Lachmayer, R. (2016): DMD Based Automotive Lighting UnitDGaO-Proceedings 2016, ISSN: 1614-8436, http://dgao-proceedings.de/download/117/117_c8.pdf
    DOI: 10.15488/4004
  • Wolf, A.; Lachmayer, R. (2016): Hybrid simulation of thermo-optical effects in laser-based white light sourcesDGaO-Proceedings 2016, ISSN: 1614-8436, http://dgao-proceedings.de/download/117/117_p59.pdf
    DOI: 10.15488/4057
  • Zghair, Y. A. (2016): Rapid Repair hochwertiger InvestitionsgüterLachmayer, R.; Lippert, R. B.; Fahlbusch, T. (Hrsg.) (2016): 3D-Druck beleuchtet - Additive Manufacturing auf dem Weg in die Anwendung, Springer Vieweg, Berlin Heidelberg
    ISBN: 978-3-662-49055-6
  • Behrens, B.-A.; Lachmayer, R.; Malik, I.; Bonhage, M.; Sauthoff, B.; Gottwald, P. (2015): Sensorik in Schmiedewerkzeugen: Temperierung von Gesenken für die Warmmassivumformung steigert Präzision und reduziert Verschleißwt Werkstattstechnik online, Jahrgang 105 (2015) H. 10, S. 692-696
  • Gembarski, P. C.; Lachmayer, R. (2015): Degrees of Customization and Sales Support Systems - Enablers to Sustainablility in Mass CustomizationProceedings of the 20th International Conference on Engineering Design (ICED15), Milan, Italy, 27.-30.07.2015
  • Gembarski, P. C.; Lachmayer, R. (2015): A Business typological Framework for the Management of Product ComplexityManaging Complexity - Proceedings of the 8th World Conference on Mass Customization, Personalization and Co-Creation (MCPC 2015), Montreal, Canada, 20.-22.10.2015
  • Gembarski, P. C.; Li, H.; Lachmayer, R. (2015): KBE-Modeling Techniques in Standard CAD-Systems: Case Study – Autodesk Inventor ProfessionalManaging Complexity - Proceedings of the 8th World Conference on Mass Customization, Personalization and Co-Creation (MCPC 2015), Montreal, Canada, 20.-22.10.2015
  • Gembarski, P. C.; Steber, G.; Lachmayer, R. (2015): Reifegradmodellbasierte Entwicklung von StrukturbauteilenDesign for X - Beiträge zum 26. Dfx-Symposium Oktober 2015, München, 07.-08.10.2014
  • Lachmayer, R.; Gembarski, P. C.; Gottwald, P.; Lippert, R. B. (2015): The Potential of Product Customization using Technologies of Additive ManufacturingProceedings of the 8th World Conference on Mass Customization, Personalization and Co-Creation (MCPC), Montreal, Canada, 20. - 22. Oktober 2015
    ISBN: 978-3-319-29056-0
  • Lachmayer, R.; Gottwald, P. (2015): Integrated Development by the Consideration of Product Experiences, 10th International Workshop on Integrated Design Engineering, 10-12.09.2014, Magdeburg/Gommern
    ISBN: 9783941016095
  • Lachmayer, R.; Gottwald, R.; Lippert R. B. (2015): Approach for a comparatively evaluation of the sustainability for additive manufactured aluminum componentsProceedings of the 20th International Conference on Engineering Design (ICED), Vol 4: Design for X, S. 215-224, ISSN 2220-4334, https://www.designsociety.org/download-publication/37774/APPROACH+FOR+A+COMPARATIVELY+EVALUATION+OF+THE+SUSTAINABILITY+FOR+ADDITIVE+ MANUFACTURED+ALUMINUM+COMPONENTS
    ISBN: 978-1-904670-67-4
  • Lachmayer, R.; Kloppenburg, G.; Stephan, S. (2015): Temperature issues with white laser diodes, calculation and approach for new packagesProc. SPIE 9450, Photonics, Devices, and Systems VI, 94501P
    DOI: 10.1117/12.2070411
  • Lachmayer, R.; Kloppenburg, G.; Wolf, A. (2015): Rapid prototyping of reflectors for vehicle lighting using laser activated remote phosphorProc. SPIE 9383, 938305
    DOI: 10.1117/12.2078791
  • Lachmayer, R.; Mozgova, I.; Gottwald, P. (2015): Formulation of Paradigm of Technical InheritanceProceedings of the 20th International Conference on Engineering Design (ICED15), Milan, Italy, 27.-30.07.2015
  • Lachmayer, R.; Sauthoff, B.; Gottwald, P. (2015): Technische Vererbung in der ProduktentwicklungVDI Konstruktion, Springer-Verlag, Ausgabe 7/8-2015, S.69
  • Lachmayer, R.; Sauthoff, B.; Gottwald, P. (2015): Technische Vererbung in der Produktentwicklung - Mit Industrie 4.0 einen Vorsprung bei der Entwicklung neuer Produktgenerationen erzielen Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, Ausgabe 1, April 2015, S. 6
    ISBN: ISSN 16135504
  • Roth, J.; Wallaschek, J.; Kloppenburg, G.; Lachmayer, R.; Meyer, B.; Thomschke, S. (2015): RGB-Laser Scanning Module for Onroad ProjectionProceedings of the 11th International Symposium on Automotive Lighting (ISAL), 385-394
    ISBN: 978-3-8316-4481-0
  • Gembarski, P. C.; Lachmayer, R. (2014): A Method for Specification of Multi-variant Products Using Degrees of Freedom of Shape Attributes in Product Structures Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014), Aalborg, Denmark, February 4th-7th, 2014. Springer International Publishing, 2014. S. 27-37. (ausgezeichnet mit dem Best Paper Award)
  • Gembarski, P. C.; Lachmayer, R. (2014): Forward Variance Planning and Modeling of multi-variant ProductsProceedings of the 24th CIRP Design Conference, Milan, Italy, April 14th-16th, 2014. Elsevier B.V., 2014.
  • Lachmayer, R.; Gottwald, P. (2014): An Approach to Integrate Data Mining into the Development ProcessThe 3rd International Conference on Modelling and Management of Engineering Processes held in Magdeburg, Germany, November 20th-21th, 2013, Springer-Verlag, p 175-186 ISBN 978-3-662-44008-7
  • Lachmayer, R.; Jürgens, Ch. (2014): Blenden wir uns selbst? Ergebnisse einer Probandenstudie zur Untersuchung der Rückreflexion an VerkehrsschildernNederlandse Stichting Voor Verlichtungskunde (Hg.) 2014 – Licht 2014, Tagungsband 21. Gemeinschaftstagung, Den Haag, S. 152-160
  • Lachmayer, R.; Jürgens, Ch. (2014): Eigenblendungen an retroreflektierenden VerkehrsschildernOptische Technologien in der Fahrzeugtechnik – VDI-Berichte 2221, VDI Verlag GmbH, Düsseldorf, S. 87-94, ISBN 978-3-18-092221-8
  • Lachmayer, R.; Lippert, R. B. (2014): Education in Cross Enterprise Engineering DesignProceedings of the 19th Academic Design Management Conference (dmi), London, England, 02. - 04. September 2014
    ISBN: 978-0-615-99152-8
  • Lachmayer, R.; Wolf, A.; Kloppenburg, G. (2014): Reflektorbasierte Laser-Lichtmodule als Zusatzfernlicht für die FahrzeugbeleuchtungNederlandse Stichting Voor Verlichtungskunde (Hg.) 2014 – Licht 2014, Tagungsband 21. Gemeinschaftstagung, 21.-24.09.2014, Den Haag, S. 16-24
    DOI: 10.15488/11561
  • Lachmayer, R.; Wolf, A.; Kloppenburg, G. (2014): Lichtmodule auf Basis von laseraktiviertem Leuchtstoff für den Einsatz als ZusatzfernlichtOptische Technologien in der Fahrzeugtechnik – VDI-Berichte 2221, VDI Verlag GmbH, Düsseldorf, S. 31-44, ISBN 978-3-18-092221-8
    DOI: 10.15488/4007
    ISBN: 978-3-18-092221-8
  • Sauthoff, B.; Gembarski, P. C.; Lachmayer, R. (2014): Der generative Gestaltansatz im Kontext von wissensbasierter KonstruktionDesign for X - Beiträge zum 25. Dfx-Symposium Oktober 2014, Bamberg, 01.-02.10.2014
  • Sauthoff, B.; Lachmayer, R. (2014): Generative Design Approach for Modeling of Large Design Spaces MCPC 2014, Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014), Aalborg, Denmark, February 4th - 7th, 2014
  • Basu, Ch.; Kloppenburg, G.; Wolf, A.; Wollweber, M.; Roth, B.; Lachmayer, R. (2013): A High Power Blue Diode Laser Pumped White Light Source Using Remote PhosphorsKhanh (Hg.): Proceedings of the 10th International Symposium on Automotive Lighting, Herbert Utz Verlag GmbH, München, S. 126-136
    ISBN: 978-3-8316-4291-5
  • Gembarski, P. C.; Lachmayer, R. (2013): Unternehmenstypologisches KomplexitätsmanagementDesign for X - Beiträge zum 24. DfX-Symposium, September 2013, ISBN 978-3-941492-63-9
  • Jürgens, Ch.; Kloppenburg, G. (2013): Adaptive KFZ-ScheinwerferKolloquium Produktentwicklung: Band 4, PZH Produktionstechnisches Zentrum GmbH Verlag
  • Lachmayer, R.; Danov, R.; Wolf, A.; Marutzky, M.; Kleinert, B. (2013): Vergleich photometrischer Messverfahren in der Kfz-LichtmesstechnikDGaO-Proceedings 2013, ISSN: 1614-8436, http://www.dgao-proceedings.de/download/114/114_b16.pdf
  • Lachmayer, R.; Mozgova, I.; Deiters, A.; Sauthoff, B.; Gottwald, P. (2013): Design Evolution by Integration of Life Cycle Information in Knowledge RepositoriesConsilience and Innovation in Design, 5th International Congress of International Association of Societies of Design Research, Tokyo, Japan
  • Lachmayer, R.; Mozgova, I.; Sauthoff, B.; Gottwald, P. (2013): Product Evolution and Optimization based on Gentelligent Components and Product Life Cycle DataSmart Product Engineering, 23rd CIRP Design Conference 2013, Bochum, Germany, March 11th-13th, 2013
  • Lachmayer, R.; Mozgova, I.; Schubert, R. (2013): Moderne Methoden der datenbasierten Prognose und deren praktische Anwerndung bei Aussagen zur technischen Zuverlässigkeit26. VDI-Fachtagung Technische Zuverlässigkeit 2013, Leonberg bei Stuttgart, Deutschland
  • Lachmayer, R.; Nasri, H. (2013): Verknüpfung eines gestengesteuerten Humanoid-Roboters mit einer virtuellen Umgebung11. Paderborner Workshop, Augmented und Virtual Reality in der Produktentstehung, Deutschland
  • Sauthoff, B.; Lachmayer, R. (2013): Optimierung von Bauteilen auf Basis von ProduktnutzungsinformationenDesign for X, Beiträge zum 24. DfX-Symposium September 2013,
  • Lachmayer, R.; Deiters, A. (2012): Unterstützung des Wissensmanagements in einer Cross Enterprise Engineering (CEE) Entwicklungsumgebung durch WebportaleKolloquium Produktentwicklung: Band 3/2012: Innovationspotentiale und Perspektiven von CAE-Entwicklungsumgebungen
  • Lachmayer, R.; Gottwald, P. (2012): Evolutionäre Produktentwicklung – Integration von NutzungsinformationenKolloquium Produktentwicklung: Band 3/2012: Innovationspotentiale und Perspektiven von CAE-Entwicklungsumgebungen
  • Lachmayer, R.; Sauthoff, B. (2012): Rechnergestützte Gestalt- und Funktionsoptimierung von ProduktenKolloquium Produktentwicklung: Band 3/2012: Innovationspotentiale und Perspektiven von CAE-Entwicklungsumgebungen
  • Lachmayer, R.; Sauthoff, B.; Gottwald, P. (2012): Product Optimization by Analysis of Gentelligent Life Cycle InformationProceedings of 1st Joint International Symposium on System-Integrated Intelligence 2012: New Challenges for Product and Production Engineering
  • Lachmayer, R.; Sauthoff, B.; Gottwald, P. (2012): Technical Evolution Process – An Approach for Product Development and Optimization,Proceedings of Norddesign, Aalborg, Denmark, August 22nd-24th, 2012
  • Lachmayer, R.; Stephan, S. (2012): Model-based validation and development of LED-systems: MValEntProc. of SPIE Vol. 8550
    DOI: 10.1117/12.981386
  • Lachmayer, R.; Vietor, T.; Lohrengel, A.; Deiters, A.; Kloppenburg, G.; Hortop, A. (2012): Challenges for Teaching in Cross Enterprise EngineeringProceedings of 9th International Conference on Integrated Product Development
  • Lachmayer, R. (2011): Kapitel zur Lichttechnik und FrontendmodulenIn: Braess, H.-H.; Seiffert, U. (Hrsg.): Vieweg Handbuch Kraftfahrzeugtechnik, ATZ/MTZ Fachbuch, 6. Auflage. Vieweg Verlag, Braunschweig

Bücher

  • Plappert, S. (2023): Wissensbasierte Entwurfsbewertung der Produktgestalt mittels Multi-AgentensystemenTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    DOI: https://doi.org/10.15488/14018
  • Hoffmann, I. (2022): Volladaptive synthetische Lichtverteilungen, TEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-657-6
  • Lachmayer, R.; Ehlers, T.; Lippert, R.B. (2022): Entwicklungsmethodik für die Additive Fertigung, 2te AuflageEntwicklungsmethodik für die Additive Fertigung
    DOI: 10.1007/978-3-662-65924-3
  • Lachmayer, R.; Kracht, D.; Wesling, V.; Ahlers, H. (2022): Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)Springer, Cham.
    DOI: 10.1007/978-3-030-96501-3
    ISBN: 978-3-030-96501-3
  • Müller, P., Gembarski, P. C., & Lachmayer, R. (2022): Design Automation of a Patient-Specific Endoprosthesis with Multi- Objective Optimized Lattice StructuresInnovative Product Development by Additive Manufacturing 2021 (pp. 113–128). Springer International Publishing
    DOI: https://doi.org/10.1007/978-3-031-05918-6_8
  • Smalian, S.; Caspary, R.; Dikty, S.; Roth, B.; Wolf, A. (2022): PhoenixD Magazine - News from the German Cluster of Excellence on Optics and Photonics, Leibniz Universität Hannover
    DOI: 10.15488/12115
  • Ley, P.-P. (2021): Konzipieren und Entwerfen hochauflösender Lichtsysteme am Beispiel eines DMD-ScheinwerfersTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-599-9
  • Müller, P., Gembarski, P. C., & Lachmayer, R. (2021): Parametric Topology Synthesis of a Short-Shaft Hip Endoprosthesis Based on Patient-Specific OsteologyTowards Sustainable Customization: Bridging Smart Products and Manufacturing Systems (pp. 669–676). Springer International Publishing.
    DOI: https://doi.org/10.1007/978-3-030-90700-6_76
  • Schneider, D. (2021): Optische Freiraumkommunikation in der industriellen ProduktionTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-642-2
  • Weigt, B. (2021): Vorhersage der Zuverlässigkeit von LEDs durch die Messung des aktuellen AlterungszustandsTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-610-1
  • Held, M. P. (2020): Hochauflösende LED-Scheinwerfer für KraftfahrzeugeTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-439-8
  • Knöchelmann, M. (2020): Prozess zur Entwicklung optomechatronischer SystemeTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    DOI: 10.15488/11351
    ISBN: 978-3-95900-520-3
  • Lachmayer, R.; Lippert, R.B. (2020): Entwicklungsmethodik für die Additive Fertigung
    DOI: 10.1007/978-3-662-59789-7
    ISBN: 978-3-662-59788-0
  • Lachmayer, R.; Rettschlag, K.; Kaierle S. (2020): Konstruktion für die Additive Fertigung 2019
    DOI: 10.1007/978-3-662-6149-4
    ISBN: 978-3-662-61148-7
  • Leuteritz, G. (2020): Selektives Laserstrahlschmelzen reflektiver OptikenTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-512-8
  • Li, Y. (2020): Laser high-resolution vehicle headlampsTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-518-0
  • Gembarski, P.C. (2018): Komplexitätsmanagement mittels wissensbasiertem CAD - Ein Ansatz zum unternehmenstypologischen Management konstruktiver LösungsräumeTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-247-9
  • Lachmayer, R.; Lippert, R. B.; Kaierle, S. (2018): Additive SerienfertigungSpringer Vieweg, Berlin, Heidelberg
    DOI: 10.1007/978-3-662-56463-9
    ISBN: 978-3-662-56463-9
  • Lachmayer, R.; Lippert, R. B.; Kaierle, S. (Hrsg.) (2018): Additive Serienfertigung - Erfolgsfaktoren und Handlungsfelder für die AnwendungSpringer Vieweg Verlag, Berlin Heidelberg
    ISBN: 978-3-662-56462-2
  • Lippert, R. B. (2018): Restriktionsgerechtes Gestalten gewichtsoptimierter Strukturbauteile für das Selektive LaserstrahlschmelzenTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    DOI: 10.15488/3489
    ISBN: 978-3-95900-197-7
  • Deiters, A. (2017): Modell eines integrierten Innovations-/Entwicklungsprozesses an einem Beispiel aus der TiefbohrindustrieTEWISS - Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-142-7
  • Johannknecht, F. (2017): Lebenszyklusorientiertes Kostenmanagement für Produkt-Service SystemeTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-176-2
  • Kloppenburg, G. (2017): Scannende Laser-Projektionseinheit für die FahrzeugfrontbeleuchtungTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    DOI: 10.15488/3488
    ISBN: 978-3-95900-168-7
  • Lachmayer, R.; Lippert, R. B. (Hrsg.) (2017): Additive Manufacturing Quantifiziert - Visionäre Anwendungen und Stand der TechnikSpringer Vieweg Verlag, Berlin Heidelberg, Mai 2017
    ISBN: 978-3-662-54112-8
  • Sauthoff, B. (2017): Generative parametrische Modellierung von Strukturkomponenten für die technische VererbungTEWISS - Technik und Wissen GmbH Verlag, Garbsen
    DOI: 10.15488/3988
    ISBN: 978-3-95900-144-1
  • Wolf, A. (2017): Laserscheinwerfer für KraftfahrzeugeTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    DOI: 10.15488/9101
    ISBN: 978-3-95900-121-2
  • Gottwald, P. (2016): Prozess einer generationsübergreifenden Produktentwicklung durch technische VererbungTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-067-3
  • Lachmayer, R.; Lippert, R. B.; Fahlbusch, T. (Hrsg.) (2016): 3D-Druck beleuchtet - Additive Manufacturing auf dem Weg in die AnwendungSpringer Vieweg Verlag, Berlin Heidelberg, Mai 2016
    ISBN: 978-3-662-49055-6
  • Jürgens, Ch. (2015): Der kontrastadaptive ScheinwerferTEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-015-4
  • Nasri, H. (2015): Entwicklung eines modularen Gestensteuerungssystems.TEWISS – Technik und Wissen GmbH Verlag, Garbsen
    ISBN: 978-3-95900-017-8
  • Lachmayer, R. (Hrsg.) (2013): Entwicklungs- und Konstruktionsmethodik. Kolloquium ProduktentwicklungPZH Produktionstechnisches Zentrum GmbH Verlag, Band 4
  • Lachmayer, r. (Hrsg.) (2012): Innovationspotenziale und Perspektiven von CAE Entwicklungsumgebungen. Kolloquium Produktentwicklung, Band 3PZH Produktionstechnisches Zentrum GmbH Verlag, ISBN 978-3-943104-80-6
  • Lachmayer, R. (Hrsg.) (2012): Entwicklungsorganisation und Projektmanagement. Kolloquium Produktentwicklung, Band 2PZH Produktionstechnisches Zentrum GmbH Verlag, ISBN 978-3-943104-49-3
  • Lachmayer, R. (Hrsg.) (2011): Produktentwicklung und Zuverlässigkeit - Kolloquium Produktentwicklung Band 1PZH Produktionstechnisches Zentrum GmbH Verlag, ISBN 978-3-943104-25-7

Patente

  • Bode, B.; Hoppe, L.; Gembarski, P.C.; Lachmyer, R. (2021): Verbindung zweier Bauteile mittels Passungen, DE102020118279B3
  • Kloock-Schreiber, D.; Bode, B.; da Silva de Siqueira, R.; Plappert, S.; Gembarski, P.C.; Lachmayer, R. (2021): Vorrichtung zum vollautomatischen Zubereiten von Heißgetränken und Verfahren zum vollautomatischen Zubereiten von Heißgetränken, DE102020119007B3
  • Kloock-Schreiber, D.; Bode, B.; da Silva de Siqueira, R.; Plappert, S.; Gembarski, P.C.; Lachmayer, R. (2021): Abscheideeinrichtung, Vorrichtung mit einer solchen Abscheideeinrichtung und Verfahren zum Abscheiden von Feststoffen aus einer Flüssigkeit, DE102020119008B3
  • Li, Y. (2020): Lighting device and method for Illumination, EP3689677A1
  • Roth, J.; Kloppenburg, G.; Wolf, A.; Held, M. P. (2020): Lichtmodul für eine Beleuchtungsvorrichtung eines KraftfahrzeugsDE102018217651A1
  • Kloppenburg, G.; Wolf, A. (2018): Bicycle lamp, WO 2018/082741 A1
  • Kloppenburg, G.; Wolf, A.; Gottwald, P.; Lippert, R. B. (2017): Flashlight having a light sourceWO 2017/050315 A1
  • Wolf, A.; Lachmayer, R.; Kloppenburg, G. (2017): Lighing module, lighting device and computer program, WO 2017/148764 A1
  • Lehr, J.; Deiters, A.; Freier, S.; Schlegel, M.; Sauthoff, B. (2016): Drilling system with adaptive steering pad actuationUS20160060959

Videos / Poster

  • Meyer, I.; Messmann, C. O.; Oel, M.; Ehlers, T.; Lachmayer, R. (2023): Multi-Material PBF-LB/M Process
    DOI: https://doi.org/10.5446/62076
  • Wawer, M. L.; Lachmayer, R. (2023): Reifegradmodell für die Verwaltung des DatenzugriffsE-Science-Tage 2023: Empower Your Research – Preserve Your Data
    DOI: https://doi.org/10.11588/heidok.00033142
  • Wawer, M. L.; Wurst, J.; Lachmayer, R. (2023): Quality assessment of research data management in research projectsVol. 1 (2023): 1st Conference on Research Data Infrastructure (CoRDI) - Connecting Communities
    DOI: https://doi.org/10.5281/zenodo.8347690
  • Meyer, I. (2022): Belichtungsprozess für die Multimaterialfertigung von Testkörpern im Laser powder bed fusion
    DOI: https://doi.org/10.5446/58540

Quellcodes / Datensätze

  • Oel, M.; Rossmann, J.; Bode, B.; Meyer, I.; Ehlers, T.; Hackl, C. M.; Lachmayer, R. (2023): Dataset: µCT data of additively manufactured multimaterial concentrated wound stator teeth
    DOI: 10.25835/epj4ecfj
  • Wurst, J.; Ganter, N. (2023): Material flow network for modeling the additive repair process by means of the PBF-LB process based on the example of tool steel 1.2709 powderZenodo
    DOI: 10.5281/zenodo.7889372
  • Wurst, J.; Ganter, N. (2023): Primary collected data for modelling the additive MAR/R process by means of the PBF-LB process based on the example of tool steel 1.2709 powderZenodo
    DOI: 10.5281/zenodo.7890446
  • Ohnemus, L.; Ewecker, L.; Asan, E.; Roos, S.; Isele, S.; Ketterer, J.; Müller, L.; Saralajew, S. (2020): Provident Vehicle Detection at Night (PVDN)
    DOI: 10.34740/KAGGLE/DS/1061422
  • Ley, P.-P.; August, J. (2019): Opti² Hybrid RaytracingGithub
    DOI: 10.5281/zenodo.3248687